The list of the step by step zynq hardware development blog learnings and projects are as below
| Topics in the Minized Zynq Hardware Development | Link to the Zynq Minized Hardware development Blog |
|---|---|
| Day 0 - MiniZed ZYNQ | Day 0 - MiniZed ZYNQ FPGA Arrives |
| Minized FPGA Board Concept and Basics | Week 1: MiniZed ZYNQ Concept and basics |
| Lab 0 Lab 1 and Lab 2 Setup Xilinx Vivado | Week 2: Done!! Lab 0 Lab1 and Lab2 |
| Lab 3 Lab 4 Lab 5 Peripheral Tests and Memory Tests | Week 3: Done!! Lab3 Lab4 and Lab5 |
| Thermal Imgaing Tests with MiniZed | Week 3: Thermal Imaging Test of MiniZed FPGA |
| Lab 6 Lab 7 Establish the data flow between PL and processing PS using PS DMA | Week 4: Done!! Lab6 and Lab7 |
| Lab 8 is about LED dimmer control, using Vivado Hardware Analyzer and Delivering Hardware to the Software Team | Week 5 Lab8 Hardware Debugging Zynq Designs |
| Lab 9 The Power of Scripting using Tcl | Week 5 Lab 9 The Power of Scripting using Tcl |
The previous training modules from other bloggers on fpga minized hardware development can be found here Path to Programmable.
The next phase of the training Module 2 focuses on software SDK development in Vivado.
Top Comments