Experimenting with Sensor Fusion

Announcing the Winners of 'Experimenting with Sensor Fusion'

rscasny

The Experimenting with Sensor Fusion Design Challenge, sponsored by AMD Xilinx, and featuring Spartan-7 SP701 FPGA Evaluation Kit has officially concluded. We had 4 participants, including the Grand Prize Winner and Runner-up. Our judges have read each…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Experimenting with Sensor Fusion: Augmented Reality - Drone Pose (Blog #2)

_david_

Table of Contents Introduction Project Description (Recap) Design Process Task #1: Implement an unaccelerated OpenCV application which handles the pose graphics. Task #2: Simplify the OpenCV functions. Task #3: Accelerate the OpenCV functions…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Sensor Fusion for Firefighters. Thermal Vision, Compass and Environmental HUD monitor with the Spartan-7

javagoza

By incorporating a low resolution thermal imaging overlay using the MLX90640 thermal array, we have already integrated all the sensors planned into the system. Table of Contents Project Update Fusion of Sensors Viewing in the dark …
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Sensor Fusion for Firefighters. Compass and Environmental HUD monitor with the Spartan-7

javagoza

We added a hardware accelerated compass synthesized from C in Vitis HLS to our environmental HUD monitor on the AMD Xilinx SP701 development board. We have tested two different magnetometers: the ST's LSM9DS1 of the Digilent PmodNAV module and the Memsic…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Sensor Fusion for Firefighters. Environmental monitor heads-up display on Xilinx Spartan-7 SP701 development board

javagoza

The project is progressing well. I added some sensors to be able to monitor the environment through the heads-up display. I also built a customizable module with Vitis HLS to display up to 16-digit virtual seven-segment display modules overlaid on the…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Experimenting with Sensor Fusion: Augmented Reality - Drone Pose (Blog #1)

_david_

Table of Contents Introduction Project Description Hardware Task Breakdown Graphics Video Capture and Display Pipeline Integration Current Status About Me Introduction Greetings Element14 community! This is my introductory…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Sensor Fusion for Firefighters. Displaying heads-up video on the live feed

javagoza

In this blog, I rebuild from scratch the demo application from the Spartan-7 SP701 FPGA Evaluation Kit Demo Project designed by Adam Taylor ( adamtaylorcengfiet ). The challenging element of that project is to show a Heads-Up display during the live broadcast…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Sensor Fusion for Firefighters. AMD Xilinx SP701 - MIPI Video Pipe Camera to HDMI Display

javagoza

I'm still learning more about image processing before I start building my Experimenting with Sensor Fusion Challenge project. In this blog I share my experiences rebuilding the Xilinx MIPI CSI-2 RX subsystem IP Core sample application. The application…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog
Sensor Fusion for Firefighters. Introductory blog.

javagoza

This is the introductory blog of my participation in the Experimenting with Sensor Fusion Challenge . First of all, I would like to thank the sponsors: Element14 and AMD Xilinx, for choosing my application to participate in this challenge. In this blog…
- over 2 years ago
- Experimenting with Sensor Fusion
- Blog