Previous posts:In the Air Design Challenge - Pollen & Allergen SensingFigure 1. Bad guy (Ambrosia pollen grain) As I’m still waiting for my challenge kit I’m using the time to consider pollen sensing since that might be the weakest po...
Title: Low Cost Harmful Algal Bloom MonitoringRecap: This is my second post. Last week, I gave a brief introduction on what is HAB (Harmful Algal Bloom) and its impact (economic, environmental and health). I also gave its cause including the role of ...
AbstractThis is a proposal for a distributed network of air quality sensors. In this document, I will write down details for making a sensor that can be installed on cars, but in the future handlebar-mounted and armband versions of the sensor can be ...
I am not the “read the manual” kind of person, so I searched for energia + cc3200, found this:http://energia.nu/pin-maps/guide_cc3200launchpad/had a quick look at the instructions and started downloading/installing software. I’m runing windows 8.1 64...
When I found out about this competition, I did a search to find similar projects and get ideas.I soon discovered these two: http://airqualityegg.com/A community-led air quality sensing network that gives people a way to participate in the conversatio...
This is my first post within the element14 community and would like to take this opportunity to thank the organisers and team behind this (In the Air Design) challenge. I must say, there are heaps of great ideas and am looking forward with the ...
Table of contents<< PreviousNext >> As I am waiting for component/kit for this challenge yet, I will be comparing forget_me_not and in_the_air design challenges here in this post for point out difference and similarity between these ...
Previous posts for this project:[AirCare] InTheAir - Project Description
Introduction
Struggling
Fallback
Introduction On Monday, I received a package from element14. It contained the two TI Launchpads provided for the challenge...
IntroductionIn order to make the system work, the first thing we need are sensor. I did some search and this is what I came up with. I need to fit sensors, parts and possibly some smd equipment into budget and that has made me fiddle with the design ...
Introduction Many of the parts we'll be dealing with in this challenge are surface mount. Therefore, it seems wise to me to blog about preparing for the surface mount board build. I have chosen a few items as part of the budget to prepare for th...
This is my first time as a Road Tester and I'm really excited about the challenge. Still waiting for my kit to arrive and in preparation I've started putting together a preliminary BOM and sent out sample requests to some vendors.
Thankyou for choosing me as a competitor in In The Air Design Challenge. I will be using different sensors in the challenge. Sensors for ozone, smoke, dust , light ,sound level will be used. If possible will be looking for ph sensors and conductivity...
Hello everyone, My goal for this road-test is to create a Portable Environment Field Tester. This can be used by outdoor enthusiasts, researchers, campers, hunters or anyone who spends time outdoors. The chances of getting lost is not very grea...
My team is assembled.I have the following amazing people ready to pull the project from possibility to implementation: Peter Steadman - project guru, mentorMyself - chief programmer and integratorAlana Gaudet - green expert and gardener extraord...
Table of ContentsNext >>First of all I would like to thank all organizers of "In The air Design Challenge" and Element14 for showing potential and selecting my application...in this first post I am sharing my application for this design challen...
Hi everyone! This is my first design challenge and got really excited when I first learned my proposal was accepted.Many thanks Dr. Defeo and sponsors (Texas Instruments, Wurth Electronics, Cisco, element14, Eclipse, Sierra Wireless) for the op...
Project Proposal: The Firecracker Aftermath Analyzer
Blog Posts
Refrences
Project Proposal: The Firecracker Aftermath Analyzer In order to measure the effect of Diwali firecrackers in India, a air pollution analyzer will be designed. It wi...
Prelude
Motivation
Project Proposal: The Firecracker Aftermath Analyzer
Work Plan
Prelude Pollution is a big problem today and its an ever increasing problem. It is said that prevention is better than cure, but a lot of people will...
Hi all, Just receive an email inform that I'm in for the in the air design challenge.Still cannot trust it, just start with what information given so far.This is my first time in challenge here. Thank in advance for all comment, suggestion, ...
Table of Contents
Table of Contents
Introduction
Remote sensor node
Sensors
Case
MQTT
Central unit
Network
Display
OpenHAB and AirVantage
Filtering system
Conclusion
IntroductionHi, the project idea I pitched for this chal...
Hi, everyone! This is my first Element14 design challenge - and hopefully not the last one.First, I have to say thanks to all the sponsors and Element14 for giving me the opportunity to take part in "In the Air" design challenge! ...
I've been selected as a finalist for the In The Air Design Challenge. Firstly, I must provide this disclaimer: I am the Senior Electrical Engineer for Hal Technology. I design hand-held and portable gas meters and particle counters. My idea ...
Firstly - thanks Element14 and Sponsors. This is an amazing opportunity. As a first reaction, I am a little staggered by the enormity of what I have taken on. My second reaction has been to reach out to people I know for assistance and encouragement....
Good morning and thank you to all who applied for the In the Air Design Challenge. It hasn't been easy for the partners to identify the competitors for this challenge: we received many ambitious (sometimes too ambitious) and detailled propo...
