This article has the details of features and specifications of the Raspberry Pi 4 and has the comparison at some points with the previous versions for a better understanding.
Researchers used the kirigami art folding technique to make versatile and durable antennas for wireless technology. (Image Credit: Drexel University)
Researchers at Drexel University and the University of British Columbia sought inspiration from kir...
Semtech has example code for their LoRaWan SX1276 sub-1 GHz radio. I've used it with an MBED project in the past.In this post, I'm trying to make their Arduino Shield work with an a RP2040. And have it send data to The Things Network.
comp...
Morse Micro says its SoC allows WiFi HaLow signals to travel 3km. (Image Credit: Morse Micro)
HaLow WiFi has been around since 2017, and Morse Micro improved the tech’s coverage. With its IEEE 802.1 1ah standard, the WiFi HaLow&...
I connected an Arduino MKR WAN 1310 to The Things Network (TTN). Then used Node-RED to connect to the TTN MQTT service and work with the data. Now I'm enabling safe TLS communication to the MQTT. This post is my log of the activity.
ima...
You can show the location of a Thing on the TTN Coverage Map. And also a line to the LoRaWan gateway(s) it uses to communicate to TTN. Things that have a GPS on board, can send that info themselves. But an Arduino MKR WAN 1310 doesn't have that ...
A bit of Linux play. How to turn an active unstructured log file into structured data.image source: nightcafe
Like many programs, my The Things Network Gateway generates a verbose log file. A lot of information. Every so many (> 1000) lines, there...
I connected an Arduino MKR WAN 1310 to The Things Network (TTN). Then tested if the Arduino integrates with TTN MQTT service. Now I'm working with the Arduino's payload in Node-RED. This post is my log of the activity.
image source...
I connected an Arduino MKR WAN 1310 to The Things Network. Then tested if the Arduino uplinks are published on TTN MQTT service. And if I can publish a downlink message on that service too. This post is my log of the activity.
image sou...
I connected an Arduino MKR WAN 1310 to Amazon Web Services (AWS IoT). Then tested if the Arduino can publish uplinks to AWS, and can receive AWS topics as downlinks. This post is my log of the activity.
image source: me
Read this p...
I connected an Arduino MKR WAN 1310 to The Things Network. And enabled both send and receive. This post is my log of the activity.
A few weeks ago, I bought a LoRaWan gateway. In this post, it helps to get and end-to-end trace. I have ...
I installed the software for the Elecrow LoRaWAN gateway (see Low-Cost LoRaWAN Gateways! ), and enabled the gateway on The Things Network (TTN). I used Raspberry OS bullseye 32-bit lite on a Raspberry Pi A+. I tested this on a B...
I saw in an e-mail an advert for LoRaWAN gateway modules, so I took a quick peek, and was surprised at how low-cost they had become. These can be used with any computer, such as a Raspberry Pi, to wirelessly monitor or control sensors ...
Seeed MR60BHA1: Sense presence, breathing, and heartbeat with mmWave precision. Non-contact, low-power, and compact for smart homes, health
The MR60BHA1 60GHz mmWave Module is a versatile sensor that utilizes Frequency Modulation Continuou...
I bought a Useful Sensors Tiny Code Reader from Sparkfun https://www.sparkfun.com/products/23352 back in September, but as always have been too busy to try it out until now...
The Tiny Code Reader (TCR) is the second Useful Sensors product ...
Hello everyone, this blog post will delve into the topic of energy monitoring, featuring the utilization of the SONOFF POW Elite energy monitoring device in conjunction with OpenHAB. In the forthcoming pair of videos, I will demonstrate the process...
NASA's ILLUMA-T will send laser signals to the LCRD satellite, which transmits them to ground stations in Hawaii and California. (Image Credit: Dave Ryan/NASA)
The International Space Station is getting an upgrade with an Integrated LCRD Low Ear...
The term "Internet of Things" (IoT) refers to a network of physical objects that can interact with one another using the Internet. The IoT network connects existing sensors and devices to the Internet in real-time, creating its ecosystem. IoT seamles...
Hey, fellow home automation enthusiasts! Are you tired of manual backing up your TASMOTA device configurations? We've got some exciting news for you! Check out these two amazing videos that demonstrate a quick and straightforward way t...
I noticed that the Summer of Green Tech Design Challenge is being sponsored by Seeed Studio and uses a kit that includes the Xiao SamD21 microcontroller and a Grove sensor pack. I've been using Xiaos for over a couple of years (Sa...
Dispositivo BPLC 10Gbps, Power Line Communications (PLC) Red linea electrica + Banda ancha (Internet) High Velocity en red electrica, Broadband Power Line 2,4 Gbps. (BPL) + WIFI 7 Power Wireless 1200w + 1000 nodos y con 2 Gigabit ethernet puerto.
Ser...
Servicios que promueve la conectividad, la interconexión, el acceso a internet a muy alta velocidad o superior a la de Fibra Óptica, velocidades que van de 200 Mbps hasta2.4Gbps con esta tecnología llamada Power Line Communicatio...
