Introduction In this project, we will be designing a system that automatically adjusts the screen brightness of a computer based on the ambient light level of the room. This will help reduce eye strain and fatigue caused by excessive exposure to scre...
Introduction In today's digital age, where electronic devices have become an integral part of our daily routine, the issue of eye strain and fatigue has become increasingly common. Overexposure to blue light emitted by electronic devices can cause di...
Introduction In today's world, where technology has taken over, electronic devices have become an essential part of our daily routine. However, with the constant use of electronic devices, the issue of eye strain and fatigue has become increasingly c...
In my previous blog I showed you how I used emWin Middleware in ModusToolbox for driving my 2.8 inch TFT display. EmWin is an excellent library for displaying graphics and bitmap image file in a display. The recommended and most efficient way to disp...
Hi to all!
"Mission complete".
I am so excited to share the final video clip:
https://youtu.be/izYSrum5AMo
I am leaving the conclusion with documentation and the project archive for the next post.
Hi to all, welcome back.
Eight days left, WOW, this time has flown away quickly. I hope you all are where you wanted to be for your project.
As I knew my project would have presented many obstacles to me, but this is the purpose of a...
The emWin is an embedded graphic library and graphical user interface (GUI) framework developed by SEGGER Microcontroller. It provides an efficient, processor- and display- controller-independent GUI for any application that operates with a grap...
Hi to all and welcome back!
the finish line is getting closer and closer, so It's about time to finalize things and edit some documentation for this project. I am completing my project with the last steps: Audio and Capsense joypad.
This post is ...
Hi to all, welcome back.
This is an important update, and even if it's a short post, I am so excited to show you this milestone.
I had to work hard at memory configuration, and I had to rewrite the code of the virtual Video Display processo...
Table of Contents
Introduction
Running on Cortex M4 Core
Code
Activating IOs using Device Configurator
Interfacing LED Bar and Testing
Videos
Introduction
This blog is about interfacing the LED bar with the PSoC CY8CKIT-062S4 board through ...
#4 The ML configuration and Obeject Detection
Table of Contents
1 Machine Learning in PSoC 62Sx
2 Object Detection
3 Migrating ML magicwand Project
4 Machine Learning Configurator
5 ML project in General
6 TFLM or IFX and memory challenges
1 Mach...
For my project I need a display for showing alphabets and related images. A bigger display is better and I choose a 2.8inch TFT Touch Shield from Waveshare Electronics. As the PSoC 62S4 Pioneer Kit has Arduino compatible headers this display can be e...
Before making anything with PSoC 62S2 Pioneer Kit first I need to set up the software environment. I am going to use ModusToolbox 3.0 with Eclipse IDE for firmware development. You can download and install ModusToolbox 3.0 using this link. You can ta...
This is my first blog for "At The Core Design Challenge". Sorry for my late starting. Due to my personal problem I could not start writing on time. Thanks to Element14 and Infineon for choosing me as one of the official challengers for the contest an...
Happy Easter to all!
I will take a quick break from the memory problems and I will develop the 1axis joypad with the Capsense peripherals on board of the Pioneer Kit.
Meanwhile I hopefully will have some smart ideas for the optimization o...
#3 Rover Platform
Table of Contents
1 The moving platform
2 How the Tennic Picker Works
3 Motor Control
4 Summary
1 The moving platform
To make it fast, one toy excavator is used as rover platform for this tennis picker. It runs in front-back, ri...
Have you ever seen the movie "Apollo 13"? It's one of my favorite movies.
There are many sequences that I like, and many moments of my life match them perfectly. This is the time of the sequence where Ken Mattingly spends hours in a simulator putting...
Hello! This is the first part of my project blog for this AtTheCore design challenge. What interested me in applying for this challenge is the extensive capability of PSoC6 controllers and devkit with fancy capsense, oboard sensors, and the theme of ...
WOW, almost one month passed since this challenge started and I must say that I like this PSoC62. But, like any other new adventure, there are many new things to learn, and the road to the "FINISH" line fills up with traffic lights.
Now, it's a...
