Navigation Widget for project14
Injecting from file: https://community.element14.com/e14/assets/main/navigation-menus/project14.html?v=c71132d4-4138-4a6f-a1b4-2a64f50a2ccc
Share your crazy arduino automations projects in honor of Arduino Day! Anything from automating your coffee, room automation, PID controllers, machine automation, line automation, and more!
Attached is a video of the bridge in operation. I had hoped to wait for the scenery to get finished but feared if I waiting I would miss the deadline for the challenge.
community.element14.com/.../automation.mp4
When I was employed in engineering pos...
The problem
When you have a garden, you don't want to dirt the porch with the shoes covered of mud. So what I typically do is to leave the shoes I walked in the garden with just before the first step that leads to the porch. But, when you go bac...
Machine Vision Deep Learning Automation on Arduino Portenta or MKR 1010
Table of Contents
1. Machine Vision Deep Learning
2. Machine Vision Deep Learning on Portenta H7
3. Deep Learning on Arduino MKR 1010
4. Automatio...
The WRONGCO Hamper Helper – blog 6 (final) – I'm not crazy, It is ARDUINO ALIVE !
Short operating description:
The Hamper Helper is a stand alone Dirty Clothes Hamper that emphatically reminds you when the hamper is full and you nee...
Blog 5 is about building the "spritz" system for deodorizing smelly disgusting clothing that gets thrown in the hamper.
An atomizer transducer and controller board were purchased for about $4. Didnt have time to design the contro...
My automation project has provided some challenges. I’m continuing to work at it, but I needed some design changes to accomplish raising and lowering the bridge automatically without failures.
It has been a while since the challenge was kicked ...
Blog 4 is takes all the lessons learned from the 1st 3 blogs, assembles the prototype of the photo-eye detection system, providing engineering test and calibration validation while operating from the Arduino.
Please reference for background blogs:
T...
CNC Foam Cutting machines are commonly used in industries such as packaging, insulation, and aerospace, where foam material needs to be cut into precise shapes. However, these machines can be expensive and may not be affordable for hobbyists or small...
Blog 3 is about my learning adventures and experiments to select an appropriate light source and excitation for optical "eye beam" interruption detection for the Hamper Helper.
Please Reference Blog 1 for background info Th...
Hereeeeee weeeeeeeeeeeeee go, the WRONGCO Hamper Helper
When you walk into the room, the Hamper Helper will let you know if the hamper is full and you need to wash clothes, by flashing a sign and an audible annoying beeper..
No worry, if the laundry ...
I have made unserviceable two L293N and one L298N motor driver modules doing something but I don't know what. I would like to know what I did, so I can prevent it from happening in the future. Can anyone share their experience or knowledge to hel...
I’m not sure what this is all about, but my project is rocket trajectory logging program. I attempted to build this project with a raspberry Sensor Hat. It had all the sensors I would need but the gyroscope and accelerometer are the same ...
Ever had to measure power consumption of some device with variable work-cycle? With low consumption when idling and spikes from time to time - every 10 minutes for example? And without dedicated tool-set - like Power Profiler Kit?I recently had such ...
The comments posted from my initial blog entry got me to thinking. Did I size this correctly?
The bridge spans the Mainland to Island. At either end of the bridge is a gate, an area to halt the bus and warning lights flashing when the bridge is...
This design challenge presented itself at an opportune time. The model railroaders are putting the finishing touches on a bridge that requires some automation.
On the other side of the bridge is a turn-about that the tug (A) needs to reach in order ...
In the Comments Below: Let Us Know What Arduino Board You Plan on Using and Tell Us About Your Crazy Arduino Automation Ideas!
You can also submit a forum post!
The Craziest Automation Project Wins a $400 Shopping Cart!
In honor of Arduino Day...
