Project14 | Volunteer to Judge the Solar Power Devices Competition!

Dear Tariq - i  just wanted to answer your first mail to me  -I  think I did not react on it -  and I want to apologize -
that I did  not saw, read your message to me .
I wanted to answer, now, directly on the entries (on the  section  of 'mailes, messages - but there I could not edit a  word - the cursor went leftward, to a  former position - that i thought - mybe  you need  to type _ hebrew ? (  from right to left )
so i am happy to find  that , here  the posibility,  to write ..
seemed that I was  chosen to become  a  judge to them projects  - i wpuld  like  to do  but i really  do not have  oversight to do accordingly ...
i can give my  2  cents  to it ..
where  do I can open a  thread  to have  stuff thematically  ordened <<<?  like  - electronics, or  mechanics, or  siverizing or ...
I can append my stuff _  as i did  to the  first post  - but over the time  - i  will become  really long - for as i said  i have  a ' monton' of  photos  i made,  during the development...

I  need  a  crash course  to how  to manage that stuff', on your page --

( that project is running since  _ 5  , 6  jears now since the first attempt - the first try out... , now , since  a year  ago the basic, mechanical  things  to it  were  realized  - I fond  someone  who welded the  frame  the  holder to it, I found, as  I was  on a  trash place for  car  wrecks-   a ' rear axis of a  car -  and thought - it will be  able  to withstand, guaranteed',  more than 500 kg force - to the sides - so it will be the  perfect disk'. platform to let my  girasol rotate, and  no wind  will blow it over'..
And than the  - exploration,  of the  ardruino - it was lke  a ' offenbarung ' to me  - to write the program to it, to have analogues inputs' ADC, and have  PWM outputs-
the  first electronics I made  to drive the motors  was  completely  analoge:
a lot of  Opamps, some  as comparator, some  as  Instrumental diffential amplifiers  ( 3 opamps - like the ina 106  from IT, ) some  digital stuff - but , a lot of  work, a loot of soldering ,... Eagle on Mac, printout on laser, thermo transfer to make the  PCB's  -  Arduino is  more,  mas'  attractive -  so I learned for that project to program that thing, and used it for my expeiments -  and it showed, that it is  fast enough to do them jobs needed .
so it grows, that project  -  and I hope that this winter, finally, it  will be  ready  to collect sun energy  to load the thermor to have  warm water, to have  a shower, or to use it in the kitchen...
Thank  you  Tariq ..

Dear Tariq - i  just wanted to answer your first mail to me  -I  think I did not react on it -  and I want to apologize -
that I did  not saw, read your message to me .
I wanted to answer, now, directly on the entries (on the  section  of 'mailes, messages - but there I could not edit a  word - the cursor went leftward, to a  former position - that i thought - mybe  you need  to type _ hebrew ? (  from right to left )
so i am happy to find  that , here  the posibility,  to write ..
seemed that I was  chosen to become  a  judge to them projects  - i wpuld  like  to do  but i really  do not have  oversight to do accordingly ...
i can give my  2  cents  to it ..
where  do I can open a  thread  to have  stuff thematically  ordened <<<?  like  - electronics, or  mechanics, or  siverizing or ...
I can append my stuff _  as i did  to the  first post  - but over the time  - i  will become  really long - for as i said  i have  a ' monton' of  photos  i made,  during the development...

I  need  a  crash course  to how  to manage that stuff', on your page --

( that project is running since  _ 5  , 6  jears now since the first attempt - the first try out... , now , since  a year  ago the basic, mechanical  things  to it  were  realized  - I fond  someone  who welded the  frame  the  holder to it, I found, as  I was  on a  trash place for  car  wrecks-   a ' rear axis of a  car -  and thought - it will be  able  to withstand, guaranteed',  more than 500 kg force - to the sides - so it will be the  perfect disk'. platform to let my  girasol rotate, and  no wind  will blow it over'..
And than the  - exploration,  of the  ardruino - it was lke  a ' offenbarung ' to me  - to write the program to it, to have analogues inputs' ADC, and have  PWM outputs-
the  first electronics I made  to drive the motors  was  completely  analoge:
a lot of  Opamps, some  as comparator, some  as  Instrumental diffential amplifiers  ( 3 opamps - like the ina 106  from IT, ) some  digital stuff - but , a lot of  work, a loot of soldering ,... Eagle on Mac, printout on laser, thermo transfer to make the  PCB's  -  Arduino is  more,  mas'  attractive -  so I learned for that project to program that thing, and used it for my expeiments -  and it showed, that it is  fast enough to do them jobs needed .
so it grows, that project  -  and I hope that this winter, finally, it  will be  ready  to collect sun energy  to load the thermor to have  warm water, to have  a shower, or to use it in the kitchen...
Thank  you  Tariq ..

Hi oliverschalles ,

Your project was great and we will try to improve documentation in the future.

The notification you received was likely because your name was messaged in a notification.

Hopefully, this doc will clear this up and if you have any questions feel free to reach out again.  

You'll find the members around here very helpful and they will assist you with any questions.

I manage the Arduino program and we've set up a space where you can post projects to called Arduino Projects .

You can also post project updates in Solar Power Devices .  

Project14 is a non sponsored project competition where the community members vote on themes to do.   We also run sponsored project competitions through Design Challenges in addition to holding contests in places like Arduino and micro:bit .

Tariq