This is the second blog in my experimenting with inductors challenge. In my last blog, I talked about Fourier series and how we can prove it experimentally using filters. In the 2nd part of the blog I'm going to cover the following topics- ...
I have achieved my stretch goal of winding some torrid-base inductors and I would like to share those results. Also, as a result of a comment on last blog by Andrew J (thanks!) concerning transient changes, I have done a bit more testing ...
Table of ContentsValidation of SPICE modeling approachProperties of InductorDetailed simulation with Altair Activate SPICE with experimental verificationModel Based Development for system simulationSummary BackgroundAs mention in part I of this ...
1. This proposed experiment shall verify the function and performance of Inductors with different values in the RF Transmitter and Receiver Circuit since inductor is key component in this design. deAnother circuit where inductors are key components i...
... continuing the previous Experiment, meanwhile we have designed the PCB through which we will be testing the functionality of our Buck-Boost Regulator design. We have used high density LiPo-pack as the primary power source for our entire circ...
1. Introduction
2. Temperature Chamber
2.1 Heating System
2.1.1 Heating Element
2.1.2 Heating Circuit
2.2 Temperature sensing
2.2.1 Thermistor characterization
2.2.2 The temperature sensing circuit
2.2.3 ADC calibration
2.3 Inductor...
Again, I want to thank the element14 Design Challenges group for selecting me to be a sponsored contestant in the "Experimenting with Inductors" competition. I also want to thank KEMET for sponsoring this competition. Background How a DC-DC...
Aim of the ExperimentThis project primarily utilizes inductors for designing a functional prototype of buck-boost regulator. The goal is to utilize the inductor along with dual FETs and other passive components that would alltogether transition...
Introduction
Individual inductor tests
Multi-inductor circuit tests
Double Transit Pulse Shapes
Conclusions
Introduction This blog details the results of the tests carried out with some of the radial inductors supplied as part of the E...
Introduction The ever-increasing use of wireless devices, such as mobile phones, computing, and remote sensing systems, have led to increased demand and dependence on the use of batteries.One of the market challenges is the potential reduction ...
Electronic components and circuits usually vary their temperature during operation to different degrees. The effect of temperature on components or circuits can range from negligible variations of their characteristics, to their complete failure. In ...
Inductor is one of the basic component, however, i have find myself not knowing deep about it. With this competition, i get attracted to explore it further.I want to explore the experiment via computer modeling and simulation. There are some possibil...
Introduction
Test Proposal in Brief
Generator Rotor Winding
Rotor Reflectometer Principle
Delay Line Principle
Radial inductor kit
Measurement of 6.8mF Inductor
Fault Location Measurements
Conclusions
IntroductionThis is my introduc...
Hi there!This is the first part of my blog in Experimenting with Inductors. Here's a short introduction of me and what I do.I'm a MS by Research Scholar from India working on Radio frequency antennas. I have been working on electronics since last 7-8...
This is Blog 2 of 2 for the Experimenting with Inductors elemet14 Challenge. In this blog, I design a circuit that will accept a multitude of DC voltages for its power source. If you haven't seen it yet, check out the first blog,Experimen...
This blog series is for the element14.com “Experimenting with Inductors” Design Challenge. In this blog, I experiment with benchtop circuits and Autodesk Fusion 3D animation to explore the tennis ball model of electron flow to describe inductan...
The element14 "Experimenting with Inductors" Design Challenge sounded like a great opportunity to study the effects of the various parameters (inductance, DC resistance and rated current (Isat)) in a DC-DC Step-up regulator circuit. I have desi...
1. This proposed experiment verifies the function and performance of Inductors with different values in the RF Transmitter and Receiver Circuit. 2. Experiment Circuit and System Block Diagram2.1 Software Defined Radio normally use speciall...
