Blog#5 Conclusion (Weather Remote Monitoring System)
In this blog, I demonstrate my finished Idea, a Weather Remote Monitoring System. I give some conclusions as to what I have gained from this Design ChallengeI answer some questions like, Did ...
Maple syrup is a delicious sugar syrup with a distinct flavor that is wonderful compliant to a variety of sweet and savory dishes. In North America I would say, the syrup extremely popular. Regardless, after all the time I spent on this design challe...
My out of box experience with the GW-001-3 was extremely positive. I followed the included quick start guide and was up and running in minutes! I registered the gateway in my Omega cloud account, connected the power cable, and connected the ethernet ...
BLOG# 4 - Testing- Weather Remote Monitoring System
This blog will do testing, on the implementation of the design. The following test will be run:
1) Running test with the smart Sensor in the 2 Hammond enclosures..
2) Running test by putti...
BLOG# 3- Implementation - Weather Remote Monitoring System
This blog will include the Implementation of the Design described in the previous blog in this Series. The Implementation will include: the setup, configuration and implementat...
BLOG# 2- Design - Weather Remote Monitoring System
This blog will include the Design of my Idea. It will describe my design specifications for the implementation of my idea for a Weather Remote Monitoring System. The design will include th...
BLOG# 1 - My Idea - Weather Remote Monitoring System
This blog is part of a blog series for the N-gaged Design Challenge. The sponsor of the challenge OMEGA, has supplied me with there Layer N Ecosystem Bundle that is used to imp...
With power over ethernet, one cable is all you need for power and data! As part of my Layer-N design challenge project, I wanted to experiment with the POE capabilities of the Omega GW-001-03 Layer-N wireless gateway. Just like POE IP cameras, WIFI a...
This is the last blog of the Smart Poultry Farm project. I will do a summary about the project and talk about possible enhancements to the smart farm itself and the Layer-N cloud.
Blog #1: This is an introduction. I talked about th...
In my application to the layer-n design challenge, I had proposed I would utilize the wired smart temperature probe (SP-005-01) to measure the ambient air temperature in our attic. This is only one of the many thousands of potential temperature meas...
.
In blog #3, I setup and configured the Gateway, Smart Sensor and Layer-N Cloud. Now I can monitor the system remotely. The various sensors' data (temperature, humidity and light) will be reported to the cloud. This will greatl...
In blog #2, I described the setup of the equipments, software and cloud in general. In this blog, I am going the talk about some specifics about the smart farm's IoT setup. The overall setup of the farm will look like the following.&n...
In this blog #2, I am going to explain how to accomplish the following:
Create an Omega cloud account
Setup the Gateway and register it at the Omega cloud
Setup the Smart Sensor and pairing to the Gateway
Install Omega Sync and configure the Smart S...
While I going to start on an IoT based Smart Poulty Farm Monitoring System, I came to know about the N-gaged Design Challenge. Before starting to build a real project, it would be ideal to make a proof-of-concept project. So I put in my a...
I welcome you to my second blog as part of my Maple Tree Telemetry project. In this blog, I will setup and explore some of the features of the SS-002-3 smart wireless sensor.
Setup
Getting the wireless sensor up and running was quick and easy. With ...
Hello Fellow challengers of the OMEGA N-Layer Design challenge.
If you are having troubles as I and a fellow challenger guillengap , with getting the Gateway from the bundle to connect to the internet, this blog might help.
I contacted Omega su...
