Thanks to the persistence of e14phil, I finally received my RSL10-SENSE-DB-GEVK on April Fools' day! That was one elaborate hoax by element14 - invite participation in a design challenge, and only send out the hardware after it had finished. Ke...
I'd like to say this project is finished, however, I cannot. The whole month of March I was working on field experiments for work, and I just got back home Saturday.To add to the tragedy, my older dog passed away yesterday, and this project was...
Introduction:
Now a day mostly mass produced vegetables and fruits are GMOs, contaminated with dangerous chemical pesticides and traces of chemical fertilizers. And mostly products labeled as organic, are not 100% organic. So the best and most cost e...
Neonatal Mortality Rate (NMR) quantifies the number of new-born deaths (i.e in the first month of life) per thousand live births and is responsible for more than 46% of all child deaths before the age of five (2.5 Million in 2018). Which means ...
The past few weeks have been a bit challenging as Malaysia my country is ravaged by covid19. we are on 18th position on the world ranking nowand under locked downBecause of that lots of extra work to be done before the locked down finally put into pl...
BackgroundBadminton is a popular sport in my country and we have produced various champions like Lee Chong Wei (in fact his family has a house at the same housing estate i stay in). Few people know that badminton shuttle *** is the world faste...
I'm really excited to show the completed project to my fellow readers. For the wrap-up post I made a GUI with Python and Tkinter to collect and display all the beacons data. In the video, two beacons are connected providing Temperature, Humidity and ...
This is my final project submission for the Think ON Design Challenge. The name of the project is Smart N' Safe and it is a Smart Home Device
Quick Jump Links
Aim
Methodology
Components Required
Procedure
Atmosphere IoT Platform
Embedded ...
With the technical side of the project progressing well, I started 3-D printing some enclosures for the RSL10 Beacons -honestly I always find an excuse to add 3D printed parts to my projects. At this point I got creative and came up with various type...
In my previous entry, I demonstrated how the Debug probe revealed the Request and Response data flowing to and from the RSL10-Sense BTLE device and a python script that I wrote to visualize the services and characteristics available. In this entry, I...
After a brief introduction about this project, it is time to know more in detail about our RSL10 device. BTLE devices can reveal quite useful information which I planned to understand first in order to progress with the project. Since I'm planning to...
Regularly, most of the electricity at home is consumed by heating and cooling with the caveat that not all the rooms have the same temperature. There are some key factors that may contribute to these temperature differences like how many sources of h...
Being an ultra low power device OLED display is perfect combo for RSL10 to display necessary information. C version of well know U8G2 library is used to interface this 0.96" OLED display with On-Semi RSL10-Sense-Gevk board. // U8G2 display ...
ADS1115 C library and main.c is attached belowOnSemi RSL-10 module has 4 ADC inputs but on RSL10-Sense-GEVK only one ADC input is available. Due to the availability of only 1 ADC pin user has only 2 options either use this single analog input with an...
Introduction...in briefOur current project focuses on city-wide waste water management and autonomous man-hole monitoring system, that helps in leveraging the cost of traditional monitoring system through IoT and sensor amalgamation technique, but it...
One thing that eBikes really lack is the ability to act as connected devices (IoT) and a decent battery management system (BMS). I mean, we have seen hundreds of projects attempting to solve the first part (temperature and environment sensing), and t...
Hi Folks !! It's Cris here with a cool project as part of the Think ON Design Challenge with ON Semiconductor. When I came across this awesome contest Think ON Design Challenge, I was so excited to participate. So without a second thought, I acc...
Software setup - Part 2 In the previous blog Smart Module for Healthcare and Asset Monitoring - Blog #3, we have completed our program, we need to flash the same on to the device. Once the project is finished, it needs to be compiled. Compi...
Software setup - Part 1 Now it's the time for the software hack!! It's not technically hacking, but rather an approach to make this kit behave as intended by forcefully putting instructions into its mind. Yes!! We are going to control...
Kit Unboxing And finally, the kit has arrived and the patience has finally paid off. The kit came in a securely packed carton. The items are: RSL10-SENSE-GEVKJlink DebuggerDebugger CableNFC antennaCR2032 batteryUSB cable (mi...
This is my final post for this prodject. the original idea was for one machine to make a very loud chirping noise under the water, that a second machine would then pick up and indicate in some way that something is wrong under the water, however when...
Introduction
Background
The project
Research
Which development environment?
Getting mobile sensor data onto the PC
Wearable enclosures
Final testing
Future developments
Conclusion
List of blog posts
IntroductionThis is the final...
Introduction
The enclosure
Testing
Finishing up
IntroductionThis is Blog #4 of my Athlete telemetry design challenge. For background, please read Blog #1, Blog #2 and Blog #3. If you've been following this so far, you'll know that, despi...
