Note: Time ran out on me in this competition, but I wanted to thank tariq.ahmad and the element14 group for selecting my proposal and sending me the Cypress CY8CKIT-043CY8CKIT-043. I am disappointed that I was unable to complete my entry ...
Thanks for falling for my vague and somewhat clickbait title! It's definitely a way to... experiment with the built in Capsense technology on the PSOC4(board 043). Did I also procrastinate 6 weeks to begin working with the PSOC? Yes.&n...
Rotary LED Blinker with PSOC 4200M
1 Introduction
2 Hardware
3 Software
4 Coding
5 Summary
Rotary LED Blinker with PSOC 4200M1 IntroductionFinger fidget spinner is proposed with application of PSoC 4200, once receiving the kits, the embed...
Digital Fever! That sounds cool, right? Same here. And "we're sending out PSoC4200 for your ideas"!!! That's exciting and it is how was able to try stepper control using PSoC4200. Thanks to E14! Starting off, I had heard about PSoC quite a...
I saw the topic for the current Project14 competition of Digital Fever and I reflected on what I might do. I remembered that I had a whole bunch of simple TTL logic ICs from over 40 years ago when I first started messing about with electronics. I ha...
If you haven't seen part 1 of the blog, do check it out!
Link: Prototyping with FPGAs - Part 1 - Basics
This blog deals with implementing a full adder on a Spartan-6 FPGA from scratch with an overview of Verilog HDL programming styles.
FPGA...
Vidor Music Jukebox
I'm proud to share my music jukebox project using the Arduino MRK Vidor 4000. It is my first project entirely using Verilog HDL!
Hardware Build
These are my connections on a breadboard.
After that I soldered it onto a ve...
This is the first blog post of my "SecuCam" project.
The goal of the project is build a basic Security Camera while also experimenting with hardware-accelerated video processing features like Motion Detection.
1. Arduino MKR Vidor 4000...
Intro
I always had a lot of fun designing digital circuits that used Boolean logic, but these days it is rare to see designs with lots of discrete gates. With this little project I'm going to have some fun designing a quadrature decoder and display ...
