Browse By Tags

My out of box experience with the GW-001-3 was extremely positive. I followed the included quick start guide and was up and running in minutes! I registered the gateway in my Omega cloud account, connected the power cable, and connected the ethernet cable…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

This is the last blog of the Smart Poultry Farm project. I will do a summary about the project and talk about possible enhancements to the smart farm itself and the Layer-N cloud. Blog #1 : This is an introduction. I talked about the concept of my…

In blog #2, I described the setup of the equipments, software and cloud in general. In this blog, I am going the talk about some specifics about the smart farm's IoT setup. The overall setup of the farm will look like the following. Here only one smart…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

In my application to the layer-n design challenge, I had proposed I would utilize the wired smart temperature probe (SP-005-01) to measure the ambient air temperature in our attic. This is only one of the many thousands of potential temperature measurement…

. In blog #3, I setup and configured the Gateway, Smart Sensor and Layer-N Cloud. Now I can monitor the system remotely. The various sensors' data (temperature, humidity and light) will be reported to the cloud. This will greatly help farm owner to…

BLOG# 4 - Testing- Weather Remote Monitoring System This blog will do testing, on the implementation of the design. The following test will be run: 1) Running test with the smart Sensor in the 2 Hammond enclosures.. 2) Running test by putting the…

In this blog #2, I am going to explain how to accomplish the following: Create an Omega cloud account Setup the Gateway and register it at the Omega cloud Setup the Smart Sensor and pairing to the Gateway Install Omega Sync and configure the…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

While I going to start on an IoT based Smart Poulty Farm Monitoring System, I came to know about the N-gaged Design Challenge. Before starting to build a real project, it would be ideal to make a proof-of-concept project. So I put in my applcation as…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor…