<<<<Previous BlogNext Blog>>>> Audio & Visual Cue System for Anosmia (Smell Disorder) and Smart WheelChair - Ft. Amazon's AlexaWeek 4: July 24 - 30 The Smart Wheelchair has ...
Hello all,Yesterday I was able to spend some time working on placing text on the LCD to get an idea of where the icons would be and where the "I Need" button would be. Here is the code I am using for this: tft.textSetCursor...
www.youtube.com/watch Hello Everyone! Sorry for the late start on the blogging. I had some issues getting the video working! In this first episode of my build vlog, I go over the kit as it was supplied f...
Welcome to our third blog post! This is just a quick update about our successful setup of SD card using SD Proto Shield and WiFi on Arduino MKR1000. The aim of this setup was to test the SD Proto Shield along with the WiFi connectivity of the MK...
We haven't done much in the past week because Dan is in Europe for a long-awaited family vacation. Back home, Kyle has been looking over the math for the accelerometer. Vector Calculus: Hard For People, Easy For Computers We wondered if we ...
Hello all,It has been a busy week with me researching the ability to implement touch screen buttons.I have found code on how to create a button area, detect touch in that area and display it out on the terminal.I need this button to look like what it...
IntroductionHi! This will be my first blog for the Design for a Cause challenge. I am extremely happy to be chosen as one of the challengers and would like to wish the best of luck to everyone participating in this challenge! This idea came to mind a...
Hi everyone, For my 3rd blog I will be showing my working braille finger pad. There will be more to the final setup but this shows how well it works. I ended out getting 6 miniature actuators to create the braille pins. It goes back to my origin...
<<<<Previous Blog Next Blog>>>> Audio & Visual Cue System for Anosmia (Smell Disorder) and Smart WheelChair - Ft. Amazon's AlexaWeek 3: July 17 - 23 This week has been primarily s...
I received the Adafruit 5.0" 40-pin TFT Display 800x480 with Touchscreen PRODUCT ID: 1596 and the RA8875 Driver Board for 40-pin TFT Touch Displays 800 x 480 Max PRODUCT ID: 1590.I had a hard time getting the display to work with the MKR1000 dev...
1. The core Hardware used in Blowing-Whistle as Controller(BWaC) is MKR1000 IoT bundle, which is supoorted by updated version Arduino 1.8.5,but the board support for MKR1000 shall be download and installed first.2. Arduino MKR1000 IoT Bundle The Ardu...
<<<<Previous BlogNext Blog>>>> Audio & Visual Cue System for Anosmia (Smell Disorder) and Smart WheelChair - Ft. Amazon's AlexaWeek 2: July 10 - 16 The second week has ...
In our most recent project meeting, we focused on determining which tasks were going to be the most difficult so that we could prioritize them. There are two things that we think will test our technical skills the most: 1. Integrating accelerome...
Welcome to our second blog post! In this blog, we would like to post our progress and findings so far.Over the years, Convolutional Neural Networks, ConvNets, or CNNs have been the top choice for image processing and recognition applications. The mai...
Hello Guys A very special Thanks to #Element14, #Arduino and other Sponsors’ for the Challenger’s Kit.I received my kit on 15th July. Here are some photos on unboxing the Challenger’s Kit.Image 1 : The Challenger's KitImage 2 : Arduino MK...
Well, I have been running some code to test reading from the SD card on the Proto Shield and it has not been working.I tested two different codes to read the card reader and it isn't working.I formatted the SD card with the downloaded program SD ...
This past few days, I unboxed the MKR1000 and was able to get it to connect properly to my laptop and check it via the Arduino IDE.LED blinking so that's a good start! I uploaded a library I found to blink the LED for one second and then off for...
After coming up with our design proposal, our team met up to discuss the plan for the next ten weeks. We set some basic parameters for how we are going to build our device so that we could then figure out a schedule that will allow us plenty of time ...
We would like to start off the proceedings by thanking Element14 and Arduino for giving us an opportunity to build a project that can impact a massive segment of the population. We hope that it will benefit a lot of people who need something like thi...
1、IntroductionBlowing-Whistle as Controller(BWaC) is based on Arduino MKR1000 Dev Board to control home appliance remotely. This is helpful to elders, slow in moving and difficult in precise touch controller like IR-remote or Mobile.There are m...
Seeing Eyeduino – Blog#2 “The chassis and more” So according to the courier the kit should be arriving tomorrow, looking forward to that!! This week’s update is the robot chassis. Right now it is about 90% complete. I used 13mm (½”)...
Well, today is July 11th 2018 and I received my kit today! I can't wait to get started on this project! I will blog regularly to show what's going on, where I am and reach out if I need help. I have been studying different things to determine...
#FirstBlogpost Smart Voice synthesizer, visualizer and Home Automation System for Dumb & Deaf Hello Everyone, It's great to be chosen for the Design for a Cause' Design Challenge, I am thankful to #Element14 Community, #Arduino...
