Link to previous posts
Preface
Getting Minions and assigning them positions
Epileptic Minions -
A simple motor switch
Raspberry Pi program to control the motor
Getting Tweets with Python
Say hello to Temboo
Putting it all together
L...
Madhu here for my blog post after a long vacation! For today's post, I am going to talk about a project that I had worked on as a fun learning project. I came across this wonderful tutorial on Adafruit's website for controlling different types o...
Hi there In my initial blog post I suggested it would be good to not only have way more than the boards provided by the challange (UNO, YUN and Infinion) but also to mix it up a bit by introducing a foreigner into the mix well I did, in the...
The participants of the The Internet of Holiday Lights RoadTest Plus received these three devices:Infineon Lighting RGB LED Arduino ShieldArduino YúnArduino Uno Evaluation Type:Evaluation BoardsApplication you used the part in:[Christmas W...
Hello Everyone, This is my second blog post for the Internet Of Holiday Lighting Road Test. In this post I will discussing how my setup for the Bluetooth Communication Between My phone and Arduino YUN, Below is the photo of my setup:  ...
Many thanks to all those who are participating in the Internet of Holiday Lights RoadTest Plus: the projects have been inspiring as well as illuminating, and have unleashed a flood of creativity which hopefully will inspire great IoT projects in 2015...
Today we will see how to run, on Arduino Yun, a webcam protocol compatible UVC (virtually every recent webcam supports this protocol). First, install the sftp to read and write files into the Arduino Yun. From SSH do the following commands:opkg ...
In the previous days I have built the code for all my clients (the light spots): they receive TCP commands from the Yún and control the lights accordingly. 1. The 3W RGB LED. The first one is an Arduino Uno connected to a custom, constant-c...
Link to previous posts
Preface
The tree that was... How to never leave Christmas behind!
Xmas Magic later....
Tree Controller
Connectivity
The static mode
The Dynamic Mode
Beware of Bugs
What Next?
Link to previous posts[Dynamic L...
I've been hard at work on my IoT Christmas Ornaments project, specifically getting the software and firmware for my little lights working nicely. As a first step toward that goal, I dove into the manual Infineon provides for the XMC1202 board in...
I have been working with my Arduino Mega ADK and a nice little TO92 temp sensor, the TSIC 301. (Datasheet here) I have been playing with a very basic sketch, all it is doing at the moment is looping around "read value and display on serial"...
XMAS is over On January 6, we remove our Christmas tree and lights in Belgium. So it's also time for my Christmas Wreath of Things to switch off.But we still have our Secret IoT Service going on - and I want to enjoy that for a little longer...
Ladies and gentlemen, engineers and hobbyists, welcome one and all to my first ever IoT project! As you can probably guess, I am one of the lucky roadtesters for the Infineon RGB shield. Now this blog has been a long time coming, and I sincerely...
I'm still waiting on my LED lights, which is making me nervous. Perhaps I shouldn't have ordered from eBay So, in the mean time, I've been working on some automation stuff with lights (when I get them). I've always w...
The idea I've been dragging my feet to enter this contest. Working with light is not my forte.But The Internet of Holiday Lights RoadTest Plus has a creative component. And that's what pulled me in.I was going to build an Electro Mec...
