The autonomous pest management will take care of the elimination of flora and fauna pests in limited or confined cultivation. The system consists of a Rpi 4 which acts as the brain.A Rpi cam connected to the Rpi4 will detect the presence of any ...
Introduction and motivation This project introduces a novel concept of pest management in closed spaces such as space farming. Be it a bunker or space vehicle with very limited space to spare, plant cultivation would be a major task,if the ...
Below is the random writings throughout the project and well.......I decided this is a portion of the project book I created that has all my sketches and information in it. For fun here it is more ramblings...... Entry #1Sept 2nd. &nb...
It's been a long journey and I have plans for more to come when it comes to my build so the fun doesn't stop here. I noticed when rendering my video a bunch of my video decided it would mess up so I have a few smaller shorter videos and informa...
Like any project there is always alternatives that can be done. I had thought a lot about this project prior to starting. I was certainly trying to find out a way to make this project the most cost efficient and easy to build so basically...
The estimated setup is as follows: * Rpi will be stacked with Rpi cam, PICO HAT Hacker PCB, PIM486 Enviro HAT, and PIM487 Automation HAT. * It will contribute to roughly &nb...
* As the theme of this design challenge goes, this project focuses on the sustainability of mankind in case of a global disaster or that of an interplanetary voyage.* The project is developed to have an autonomous self-contained system for plant cult...
The whole Mushrooms' Paradise blog
Components
ESP32
DIY Irrigation kit
Soil moisture sensors.
Water pumps
3.3v Relays
And the problem
This post is about the vegetable part of the farm. This part doesn’t use anything f...
INSTALLATION OF LIGHTSBefore moving on to the final stages – Schematic Design of the Complete System and Schematic Design of Controls – I installed LED lighting and configured the Operational Controls, with an additional indication feature:MVF LIGHTS...
The whole Mushrooms' Paradise blog
Introduction
Step 1. Rehydrating the mushroom cakes
Step 2. Preparation of Vermiculite and Perlite
Step 3. Putting mushrooms on the trays
Introduction
To grow mushrooms I used the &ldq...
Addendum A to Blog/Post Nine: I previously wrote:“Note: In the original proposal I had included a Solar Panel (or a series of panels) to be sited at the very top of the Construction to provide additional back-up power.” ADDS: As the appli...
I was working on making a Box for putting the sensors and Pi as well as lights which have arelatively nice encloser. I went to one of the friends who could make such a box of a Wood I don't know how good I was in building the box and also in...
This is the last blog required, as well as the last one documenting major changes.. This blog includes my final thoughts, and potential future direction. Let's first jump into what I did in the past few days. I've made the system...
The whole Mushrooms' Paradise blog
For the enclosure I used an old non-working fridge. Mushrooms and vegetables will grow inside the fridge, electronics are located just next to it. The reason for electronics to be outside is I need RPI to be...
So I decided I would add to the front panel it worked pretty good it's all sealed up on the inside and I just used some green tape to seal the front doors up. So we should be good and sealed up now. I will however shortly here have to get...
So now I have my watering system all setup its time to get to the planting so where do we begin. I decided to use peat pucks for planting the seed as given anywhere nutrients and everything can be added to a system after the fact but getting th...
When it comes to working the bugs out there is many things to think of first we have hardware related bugs things that won't work and then software issues where things wont work with what we have installed for hardware. This can sometimes be ch...
