Blog

Blog Summary #005 : Sudden Impact Challenge 2014

cstanton

The Sudden Impact Challenge is running from December 1 to May 8th 2015.Previous Activity:Blog Summary #000 : Sudden Impact Challenge 2014 Blog Summary #001 : Sudden Impact Challenge 2014 Blog Summary #002 : Sudden Impact Challenge 2014 Blog Summary #003...
- 24 Apr 2015
[real_time_monitor] Real Time Player Monitoring System Post#12 : Marching towards final build

ravi_butani

<< Previous Post Table of Contents Next Post >>In my Previous Post, I have shared my PCB designs and Testing of CC3200MOD based main MCU board.. Today I am sharing my work towards get the final build... To improve form factor of...
- 24 Apr 2015
Skier impact monitor 11 - When blue teeth start talking

hlipka

(Complete list of all blog entries in this series)I already mentioned that I'm on a business trip right now, so progress was quite slow. I did some work on the PCB, more on that later.Since the trip involved flying over the atlantic ocean, I took...
- 22 Apr 2015
Part1.4 ECG Beat Rate [QRS complex detection]

sunnyiut

Title: Total Player MonitoringBy: Md. Kamrul HussainProject Category: Design ChallengeProject Name: Sudden Impact Wearables Design ChallengeBlog post: 05 Intro: In this blog post I would like to present my experiment on H...
- 19 Apr 2015
Heart Rate Monitor Works and More!

quisss

This post is going to be short and sweet. I got the heart rate monitor working and got the Arduino boards to properly read the input to determine distinct heart beats. Below is a video of the heart rate waveform:players.brightcove.net/.../index....
- 19 Apr 2015
EasyConfigure - Sudden Impact Monitor

tomaja

Previous posts:EasyConfigure - Modular/Configurable System Intro EasyConfigure - Hardware Components EasyConfigure - BASH scripting EasyConfigure - MQTT test setup EasyConfigure - Remote sensor unit preparation EasyConfigure - Configurator Sudden Imp...
- 14 Apr 2015
EasyConfigure - Configurator

tomaja

Previous posts:EasyConfigure - Modular/Configurable System Intro EasyConfigure - Hardware Components EasyConfigure - BASH scripting EasyConfigure - MQTT test setup EasyConfigure - Remote sensor unit preparation Configuration tool Some progress...
- 14 Apr 2015
[real_time_monitor] Real Time Player Monitoring System Post#11 : PCB Designs

ravi_butani

<< Previous Post Table of Contents Next Post >>In my Previous Post ,I have shared testing of android app for realtime player monitoring system with dummy UDP packets over WiFi.I have almost done with PCB design for my Final Prototype....
- 10 Apr 2015
Wearable Sudden Impact and Health Monitor - Update 9

ciorga

I am back with another update on my "Wearable Sudden Impact and Health Monitor" project. In my previous update I showed how I improved my Android app by adding a graph that will display the real time ECG measurement. That t...
- 9 Apr 2015
[real_time_monitor] Real Time Player Monitoring System Post#10 : Android Application Test with Dummy UDP packet

ravi_butani

<< Previous Post Table of Contents Next Post >> Here Is Android App demo for Real Time Player Monitoring System...players.brightcove.net/.../index.htmlIn this video I have shown testing of my android app for real time player monitoring...
- 8 Apr 2015
[real_time_monitor] Real Time Player Monitoring System Post#9 : Heart Rate monitoring using AD8232

ravi_butani

<< Previous Post Table of Contents Next Post >> In My Previous Post I have shared Impact detection algorithm.. Today I am going to share AD8232 based heart rate monitor demo..I have just used 4x5cm PCB as ECG Probe and ...
- 8 Apr 2015
Skier impact monitor 10 - just an update

hlipka

(Complete list of all blog entries in this series)Wow, I just realized that my last update was already three weeks ago. That also means I don't make fast enough progress right now. My excuse? There was a 70th birthday that needed to be celebrated...
- 2 Apr 2015
[real_time_monitor] Real Time Player Monitoring System Post#8 : Impact Detection Algorithm with ADXL375

ravi_butani

<< Previous Post Table of Contents Next Post >> In my Previous post…, I have shared my Initial Android application that supports Realtime graphs of Accelerometer data..In this post I am sharing Full Proof Impact detection and remote up...
- 1 Apr 2015
Measurement of Head Trauma - Crown Tools update 25

dougw

Crown Tools - Head Trauma Measurement DiscussionThis blog explains the design philosophy associated with the Crown Tools Project which is an entry in the Sudden Impact Design Challenge.I hope this discussion helps others tackle this difficult design ...
- 25 Mar 2015
Wearable Sudden Impact and Health Monitor - Update 8

ciorga

Hello Everyone, this is another update on my "Wearable Sudden Impact and Health Monitor" project. In my previous update I showed how I connected the Analog Devices EVAL-ADXL375Z module to an Arduino nano and how I measured a physical impact usin...
- 23 Mar 2015
SFH: Week 10 - Dawn of the new implementation

hawkeyethehacker

Over the past few weeks I have been working on a new Server/Client implementation and finally, there is a result from the work.Pictured above are two screenshots from the app, in addition to the web monitoring page (monitor.php) Below is a diagr...
- 21 Mar 2015
SFH: Bonus - Question and some real-world information

hawkeyethehacker

Hello everybody, Just a quick update to ask a question and let you guys see some stuff:First off, you can take a look at this. This is a webpage that will show you values of the current different sensors on the electric Imp. If it is running, yo...
- 20 Mar 2015
EasyConfigure - Remote sensor unit preparation

tomaja

Previous posts:EasyConfigure - Modular/Configurable System Intro EasyConfigure - Hardware Components EasyConfigure - BASH scripting EasyConfigure - MQTT test setup ESP8266I recently received a couple of ESP8266 WiFi modules that I considered using ...
- 19 Mar 2015
Part1.3 ECG output of AD8232

sunnyiut

Posted by Md. Kamrul Hussain March 17, 2015Title: Total Player MonitoringBy: Md. Kamrul HussainProject Category: Design ChallengeProject Name: Sudden Impact Wearables Design ChallengeBlog post: 04 Intro:It’s my fourth blog post in the Sudd...
- 17 Mar 2015
SFH: Week 9 - Some hardware updates

hawkeyethehacker

Small progress but with some critical additions -- we'll let the pictures do the talking. Found an old belt, attached the Electric imp & ECG module to it. Pretty neat way of having a compact way for the player to wear it.
- 14 Mar 2015
Sudden Impact Challenge - Blog Entry 4

kas.lewis

This past week or so has produced some promising movement as well as some valuable learning experiences, I will outline these below. ADXL362 DeadAs noted in Blog Entry 3, I have been working to get the SPI working in a useful and simple format....
- 13 Mar 2015
EasyConfigure - MQTT test setup

tomaja

Previous posts:EasyConfigure - Modular/Configurable System Intro EasyConfigure - Hardware Components EasyConfigure - BASH scripting 1. IntroductionI still didn't receive Analog Devices kits but hopefully I will very soon. This is due to alternativ...
- 11 Mar 2015
Challenge Update

turfgnome

sorry it has been so long updating, I have been working on getting a single strap that would measure temperature, heart rate, and breathing rate. I have found that getting all 3 does not seem possible with my current configuration so I have res...
- 10 Mar 2015
Smart Clothes - 2 - Packages

konorengineer

My last post was published a little long time ago, I need to say sorry for this delay. In January I read the related papers and books about ECG and started to make a list of necessary (additional) devices. At the end of January the standard item...
- 10 Mar 2015
[real_time_monitor] Real Time Player Monitoring System Post#7 : Initial GUI application with Graphing and Plan for final hardware

ravi_butani

<< Previous Post Table of Contents Next Post >>In my [Previous post I have shared my work regarding interfacing ADT7320 temperature sensor with CC3200 Launchpad using SPI. In this post I am sharing my initial GUI App for Android/PC with G...
- 10 Mar 2015