So I had a project in mind for a while I love working with lm386 chips and working on making better audio with it so I decided the best route to do that was to make a custom arduino audio player that I could connect my lm386 audio boards to i...
Arduino in Test Instrumentation
To celebrate Project 14's birthday, I made a programmable switch with an Arduino UNO.
This final post shows a complete LabVIEW example with the instrument.
The LabView Example
&...
Foreword
The problem analysis
Facing some math
Controls and Switches
Prototype Design
Electronics
Simulation Building
Assembling the prototype
The Software
Interface Design
The Software Headers
The Main Application (Lino.ino)
...
The basic idea was to create IR intervalometer for my Nikon DSLR. I have found in network information about captured raw signal from existing Nikon ML-L3 remote control. So, I have decided to use this information and Arduino Uno to create IR time-l...
Arduino in Test Instrumentation
To celebrate Project 14's birthday, I'm going to make a programmable lab instrument with the UNO that I received from tariq.ahmad.
The device can be used in a LabVIEW setup and will allow you to co...
This project was done to showcase the Arduino abilities to students taking part in Futureintech's "Introduction to Arduino".
It consists of an :-
Analogue Input
Digital Input
DS18B20 temperature sensor
I2C LCD display
Buzzer
Relay
LED (onboa...
Foreword
Note: Aiming to make this project 100% open and fully available for the community I have removed it from the online market on Tindie. If you like it, just download, hack and Do It Yourself!
Introduction
Hardware setup
Controlling th...