Blog

Kinetis Design Studio 3.0 Kinetis SDK 1.2 Processor-Expert using FRDM-KL43Z: Blink Red Led with TPM (Timer PWM Module)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. This is a project for blinking an RED LED using TPM module of PE implemented using freedom board FRDM-KL43Z.RequirementsTo run ...
- 31 Jul 2015
Kinetis Design Studio 3.0 + Kinetis SDK 1.2 Processor-Expert Using FRDM-KL43Z: Toggle Green LED using PIT (Periodic Timer Interrupt)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. This is a project for Toggle a Green LED using PIT module of PE implemented using freedom board FRDM-KL43Z.RequirementsTo run s...
- 29 Jul 2015
Kinetis Design Studio 3.0 Kinetis SDK 1.2 Processor-Expert using FRDM-K22F: Toggle Green Led using PIT (Periodic Timer Interrupt)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. This is a project for Toggle a Green LED using PIT module of PE implemented using freedom board FRDM-K22F. RequirementsTo ...
- 23 Jul 2015
Kinetis Design Studio 3.0 Kinetis SDK 1.2 Processor-Expert using FRDM-K64F: Toggle Led_using_PIT (Periodic Interrupt Timer)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. In this project we are toggling a Blue LED using PIT component module of PE implemented using freedom board FRDM-K64F.Requireme...
- 22 Jul 2015
Kinetis Design Studio 3.0 + Kinetis SDK 1.2 Processor-Expert using FRDM-K22F: Dimming Green Led with FTM (varying Duty Cycle)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. This project demonstrates dimming the LED (i.e varying the duty cycle from 0-100% and 100 to 0%) using FTM module of PE impleme...
- 17 Jul 2015
Kinetis Design Studio 3.0 + Kinetis SDK 1.2 Processor-Expert using FRDM-K22F: Blink Green Led with FTM (Flex Timer Module)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform This is a project for blinking an Green LED using FTM module of PE implemented using freedom board FRDM-K22FFRDM-K22FRequi...
- 16 Jul 2015
Kinetis Design Studio 3.0 + Kinetis SDK 1.2 Processor-Expert using FRDM-KL46Z: Blink Red Led with TPM (Timer/PWM Module)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. This is a project for blinking an RED LED using TPM module of PE implemented using freedom board FRDM-KL46Z.RequirementsTo run ...
- 13 Jul 2015
Kinetis Design Studio 3.0 + Kinetis SDK 1.2 Processor-Expert using FRDM-KL27Z: Blink Red Led with TPM (Timer/PWM Module)

bheemarao

Here is a Project created using new KDS version 3.0 and Kinetis software development kit 1.2 on processor expert platform. This is a project for blinking an RED LED using TPM module of PE implemented using freedom board FRDM-KL27Z.RequirementsTo run ...
- 13 Jul 2015
Brave New Hello World

elecia

At O’Reilly’s Solid conference, I presented an introduction to using inertial sensors. In the talk, I passed around a hardware demonstration to illuminate accelerometers, angular rate sensors, and magnetometers. The device is "hello world&q...
- 30 Jun 2015
[FRDM-K64F +KDS3.0 + Processor Expert(PE)] Tutorial: working with Xtrinsic Sensor Board with switch interface and displaying data on hyper terminal

bheemarao

Brief Introduction:This project introduces on interfacing e14 xtrinsic sensor board to Kinetis freedom board K64F. As we know xtrinsic sensor board is having pin compatible of arduino interface and K64F is also having arduino compatible interface so ...
- 23 Jun 2015
[FRDM-K64F + KDS 3.0 + KSDK 1.2.0 + MQX ] Tutorial: Create MQX RTOS for KSDK and Processor Expert using Tasks

bheemarao

Here is a tutorial working on to Create an MQX RTOS project with Processor Expert using New Kinetis Design Studio 3.0 IDE and using Kinetis Software development kit (KSDK) 1.2.0. Processor Expert provides a graphical interface for configuring your pr...
- 15 Jun 2015
[FRDM-K64F + KDS3.0 + KSDK 1.2.0] Tutorial: UART communication (using polling) with a console on the host through OpenSDA

bheemarao

This project demonstrates UART through OpenSDA (character is printed back on console through the CDC port of the board) with the FRDM-K64F Board using New Kinetis Design Studio 3.0 IDE and using Kinetis Software development kit (KSDK) 1.2.0 This exam...
- 8 Jun 2015
[FRDM-K64F + KDS 3.0 + Software Dev Kit (SDK) 1.2.0] Tutorial: GPIO Toggling using Interrupt without Processor Expert

bheemarao

Here is a tutorial working on GPIO based interrupt using KSDK. Toggling Led using push button (interrupt based event) on FRDM-K64F board using New Kinetis Design Studio 3.0 IDE and using Kinetis Software development kit (KSDK).Before we begin m...
- 29 May 2015
[FRDM-KL46Z + KDS + PE] Tutorial: UART communication with a console on the host through OpenSDA

bheemarao

This project demonstrates UART through OpenSDA (character is printed back on console through the CDC port of the board) with the FRDM-KL46Z Board and Kinetis Design Studio. I have created a demo project which communicates with a console on the...
- 22 May 2015
[FRDM-KL46Z + KDS + PE + Mikroe Click SHT11] Tutorial: Interfacing SHT1x click module and displaying sensor data on hyperterminal

bheemarao

Here is a project created to interface SHT11 click module (humidity and temperature sensor) with FRDM-KL46Z freedom board.Before we start this project below are the pre-requisites:KDS 2.0.0 software tool from Freescale(http://www.freescale.com/webapp...
- 5 May 2015
Freescale FRDM-KL25Z & Kinetis Design Studio

fvan

Not so long ago, I picked up a Freescale FRDM board from Farnell purely because I had never worked with one before and wanted to give it a try. While browsing, I came across the KL25Z which looked like a perfect entry model at a very reasonable price...
- 26 Apr 2015
Farnell element14 to distribute IBM and ARM-mbed IoT Starter Kit

FreescaleTools_and_Software

This news has been extracted from New Electronics article from Neil Tyler available HERE Farnell element14 is become the first distributor to stock the recently launched ARM mbed IoT Starter Kit – Ethernet Edition for IBM Internet of Things Fou...
- 20 Apr 2015
Share your experience with Freescale Processor Expert answering the survey

FreescaleTools_and_Software

We would really like hear about your experience using the Freescale automated code-generator named Processor Expert (Processor Expert webpage either standalone Microcontroller Driver Suite or integrated with Kinetis Design Studio IDE).Bheema has alre...
- 12 Apr 2015
[FRDM-KL27Z + KDS + SDK] Tutorial: Toggling an RGB LED with Processor expert

bheemarao

Here is a tutorial for toggling RGB Led’s on FRDM-KL27Z board using Kinetis Design Studio IDE and using Kinetis Software development kit (KSDK).Before we begin make sure below requirements are there as setupRequired Hardware and Software: FRDM-K...
- 8 Apr 2015
[FRDM-KL27Z + Kinetis Design Studio (KDS) + Software Dev Kit (SDK)] Tutorial: Toggling an RGB LED without Processor expert

bheemarao

Here is a tutorial for toggling RGB Led’s on FRDM-KL27Z board using Kinetis Design Studio IDE and using Kinetis Software development kit (KSDK).Before we begin make sure below requirements are there as setup.Required Hardware and Software: 1. FR...
- 1 Apr 2015
[FRDM-KL05Z + KDS + PE + Mikroe Click SHT11] Tutorial: Display temperature and humidity data on hyperterminal

bheemarao

Here is a project created to interface SHT11 click module (humidity and temperature sensor) with FRDM-KL05Z freedom board.Before we start this project below are the pre-requisites:KDS software tool from FreescaleFRDM-KL05Z Freedom development boardFR...
- 20 Mar 2015
Create an IoT system with FRDM-K64F - Part 2 : Sensor SD Datalogger

bheemarao

Here is a project created to interface 6-axis sensor FXOS8700 and storing its data on SD card together act as data logger using K64F freedom board. Refer to my earlier blogs which i have created separately on interfacing FXOS8700 sensor present onboa...
- 17 Mar 2015
[FRDM-K64F + KDS + PE + Mikroe Click SHT11] Tutorial: Display temperature and humidity data on hyperterminal using Bit Banging

bheemarao

Here is a project created to interface SHT11 click module (humidity and temperature sensor) with FRDM-K64 freedom board.Before we start this project below are the pre-requisites:KDS software tool from FreescaleFRDM-K64F Freedom development boardFRDM-...
- 9 Mar 2015
[FRDM-K64F + Kinetis Design Studio (KDS)+Processor Expert(PE)] Interfacing inbuilt 6-axis sensor FXOS8700 and displaying the data on terminal

bheemarao

Here is a project created to interface and explore the features of FXOS8700 sensor available onboard with K64F freedom board. FXOS8700CQ is a small, low-power, 3-axis linear accelerometer and 3-axis magnetometer combined into a single package. ...
- 11 Feb 2015
[FRDM-KL46Z + Kinetis Design Studio (KDS)+Processor Expert(PE)] Tutorial: Interfacing Bluetooth module HC05 and Xtrinsic sensor module to KL46 and getting the sensor data on Android APP using mobile phone

bheemarao

Here is a project created to interface Xtrinsic sensor and Bluetooth module HC-05 to KL46Z freedom board and display the sensor data on android app “Blue Term” The Block diagram of this setup is as shown belowAndroid phone communicated to the MC...
- 12 Jan 2015