Actions
Engagement
  • Author Author: tariq.ahmad
  • Date Created: Date Created
  • Last Updated Last Updated:
  • Views 2426 views
  • Likes 17 likes
  • Comments 23 comments
Related
Recommended

Project14 | Winners Announcement: Tool Kits for Do-It-Yourself Test Instrumentation!

image

Test Instrumentation

Enter Your Electronics & Design Project for a chance to win a Grand Prize for Originality, a Tool Set, and a $100 Shopping Cart!

Back to The Project14 homepage image

Project14 Home
Monthly Themes
Monthly Theme Poll

 

image
image

 

Congratulations to   for "No lies" IR Thermometer!  You are the winner of the Grand Prize package of an 18-Piece Journeyman Tool Set and a $100 Shopping Cart!

 

Congratulations to for Working Prototype of a Kelvin (4-Wire) Milliohm Meter, for TinyDVM, and for µBOSS .... Test Instrumentation ... micro:bit!  You are First Place Winners of the 6-Piece Trim Out Tool Set and a $100 Shopping Cart!

 

"There is a great satisfaction in building good tools for other people to use." - Freeman Dyson,  theoretical physicist and mathematician known for work in quantum electrodynamics, solid-state physics, astronomy and nuclear engineering.

"A tool is but the extension of a man's hand, and a machine is but a complex tool. And he that invents a machine augments the power of a man and the well-being of mankind." - Henry Beecher, pioneering American anesthesiologist, medical ethicist, and investigator of the placebo effect at Harvard Medical School.

"It's best to have your tools with you. If you don't, you're apt to find something you didn't expect and get discouraged.” - Stephen King,  author of horror, supernatural fiction, suspense, science fiction and fantasy.

Thanksgiving has come and gone here in the Chicago office and the holiday season is getting ready to kick off in full swing.  In the US, it's a time when we show our gratitude for the things we are thankful for, such as family and the friends that we make our family, before glutinously scarfing down a turkey and whatever else we could crowd onto our plate.  Before we did that we sent out some micro:bit as part of Project14 | Test Instrumentation: Tool Kit Prizes: micro:bits for Testing Tool: bits! We also added Tool Kits to all our prizes because we all know how much you love your Test & Tools.

 

Project14  is a program that by its very nature is inclusive.  It is after all, a program whose vision is that we can only be our best selves when what makes us different, is what makes us unique and original.

 

It's our belief that the differences we have are opportunities to learn from one another as a way to improve, not something that separates us.  You have to have leadership that supports those values and we are certainly thankful that we have that here. It really starts out at the top with , the head of the element14 community and .  Two fearless leaders with two different styles that I have learned so much from and am grateful for. I'm also thankful for , who I only started working with when this program began, and has worked tirelessly in supporting the program, month in and month out.  Although she's in Spain and we've never been in the same physical location, she has become one of my favorite people to work with.  Hard to imagine this program succeeding without her tireless effort and support as social lead.

 

Without further adieu here are your winners....

 

 

{tabbedtable} Tab LabelTab Content
The Winners

 

The Grand Prize Winner

 

"No Lies" IR Thermometer by

 

likes thermometers.  As he sees it, temperature is one of the most popular things to measure whether its in your home, work place, or in machines.  With his wife expecting, he decided to welcome him or her into the world with a body thermometer.  After finding no luck with commercial options, he decided to make one himself as the perfect gift to give their future electronics enthusiast. First, there is no value specified for the emissivity set in the IR sensor. Second, there are usually two types of measurements: for body use and general-purpose home use.  "No lies" IR Thermometer was his solution. 

 

An infrared thermometer measures the amount of thermal radiation by the object being measured. It is based on an effect called black-body radiation, which is a thermal electromagnetic radiation, that has a specific spectrum and intensity, depending on the body’s temperature. Most of the emission is in the infrared region, but with increasing temperature get to the human visible light region.

To make things more complicated, real objects never radiate as ideal black-bodies. They emit a fraction of what would the ideal black-body emit. This is described as emissivity, meaning how well the real body radiates, compared to the black body. Emissivity also depends on various factors, but in common engineering, it is considered a constant.

 

imageimage

"A genuinely useful project that was really well documented. It's great that he explained his need for it, the reasons behind the design choices, etc. I must admit though, my wife (who's a doctor) and I find that the off-the-shelf IR thermometers work just fine for our kids!" - Community Member Judge

"This was a great project to following through its development.  The results were great." - Community Member Judge

 

 

"This  is just a fantastic project, bespoke PCBs, plenty of photographs, cool  videos and a wealth of well written documentation that kept me busy for  hours (both when posted initially and for selecting my winners)." - Community Member Judge

 

"Well documented project with some nice research about the working of thermometers." - Community Member Judge

 

"It covers all the points that I think makes it a winner. It would something I would be keen to do as well.  1. The idea is original idea and usable in everyday life.  2. Clear description of the problem statement with facts. 3. overcoming challenges such as doing your own pcb and design, analysis. 4. Completion of the project is well executed. There was prototyping and then the final results 5. Many experiments were done to arrive to end results. The blog is written excellently with results. Working video demo of the end product." - Community Member Judge

 

Also on Project14 by :

 

 

The First Place Winners

 

Working Prototype of a Kelvin (4-Wire) Milliohm Meter by

This is the prototype for an inexpensive but reasonably accurate meter for measuring resistance in the milliohm range. The development was documented in detail and links can be found at the bottom of this post.  The prototype is functional but still under development so continue to watch this space if you are interested in the final outcome.

 

Features

  • Low cost
  • Dual range covering from 1 milliohm to 40 ohms
  • Choice of power source - USB or batteries
  • Kelvin (4-wire) probes
  • Temperature compensated precision current sources
  • Signal amplification based on the MCP6N16 instrument amp
  • Low current (1 to 10 mA) through the Device Under Test (DUT)
  • Provision for future "out of range" indication
  • Provision for future auto ranging
  • Better than 1 milliohm accuracy down to 1 milliohm

 

imageimage

 

"Also a device which can be very handy while doing tests and measurements. Recycling old stuff from the house; great!!; made his own pcb design and blog well written." - Community Member Judge

 

 

 

 

"A great project. Well designed, well built and well demonstrated.  This is a great tool to have available on any work bench." - Community Member Judge

"Frank progressed this well presented project with its own PCB and enough material in the professional write up to allow others to understand the design or to be able to build there own. The project consisted on many posts and informative videos. This project is something I may like to copy myself at a later date. A well deserved joint first place." - Community Member Judge

 

Also on Project14  from fmilburn:

 

Tiny DVM by

 

is using the Arduino MKR 1010 WiFi controller for the TinyDVM as a way of testing it. After looking at several OLED displays he settled on the SparkFun Micro OLED breakout board. It seemed to have a reasonable size display and because it was supplied as a breakout board it was easy to prototype. It has a graphical display so I can try out different sizes of text display to see which is best. There is also the added possibility of being able to use some sort of graphical voltage display, such as voltage against time. SparkFun also provided a detailed hook up document along with an extensive library for drawing both text and graphics on the display.

 

 

"DubbieDubbie's project was one of the few that score extra points in my opinion for the fun aspect. Who couldn't like that ultra small display and the 3D printed bespoke casing. The videos provided were really interesting and made this the top prize winner for me." - Community Member Judge

 

 

"The grand prize is deserved to the TinyDVM#4 : Graphical Display for its completeness and size. This project is very interesting as it is easy to replicate by other users but in the meantime includes a number of complex aspects, a nice challenge for a one-month project. Notable the use of the small display with the real time graphical representation of the variations. The TinyDVM catch me." - Community Member Judge

 

Also on Project14 by :

 

 

µBOSS .... Test Instrumentation ... micro:bit by

 

This Project14 blog is about turning a BBC micro:bit into a test instrument. calls this a micro:bit of sense system or µBOSS. The micro:bit already has a nice set of sensors but they aren't very easy to read on the built in LED display, so his thought is to display all the sensor readings on an LCD, turning it into a test instrument that has the following capabilities:

  • Thermometer
  • Volt Meter
  • Compass
  • Digital Level

 

Additional features include a lithium-polymer battery and a rectangular 3D printed case that allows flat surfaces to be measured for levelness. The electronic design is based on a custom interconnect PCB that hosts a micro:bit connector, an LCD footprint, a power switch, a analog input connector and a charging connector.

 

imageimage

 

This is a well documented and easy to reproduce project. There's nothing really complicated but it's the sort of thing that really inspires a beginner to think 'I could make one of those.'" - Community Member Judge

 

 

"The project is useful and compact. Also this can be easily tried again to make one for us. I really liked the diffuser used for making the LEDs

in micro:bit more readable. Overall Doug has once again produced another complete project that looks like a product, which is his style and what

makes him stand out." - Community Member Judge

 

Also on Project14 by

Runners Up

 

Runners Up

 

tinyMonster - Analog Precision opto-isolator by

 

Maximum and minimum possible output voltage are limited to integrate it with microbit analog input and to avoid any damage to microbit. Maximum output voltage will not exceed microbit analog input maximum limit 3.6V and similarly minimum output voltage will not go below 0V even if negative voltage is applied at the input. Before connecting it to microbit the supply voltage at microbit 3V ring is tested and it is ~3.2V instead of 3.3V when supplied through usb and it was also momentarily dropping (~3.1) when something is displayed on leds matrix. So in order to avoid any possible damage to analog input, the maximum output of opto isolator circuit is limited to 3.0V. Because maximum possible IO voltage for microbit is VDD+0.3 volt. After Calibration and max min limit setting, it is tested at different voltages to check output linearity.

imageimage

 

"This is a simple project with more use cases. The case for the project makes it more professional and the integration of micro:bit makes it an useful

DIY project." - Community Member Judge

 

 

"The idea was good. Well executed with many applications in his project. Also made his own hardware and tested. The final blogging video could have been better and also the problem statement could have been well written." - Community Member Judge

 

Also on Project14 by :

 

A Simple DC Electronic load for the experimenter's Shop.  by

 

In making this project   tried to use as many salvage and off my shelf parts as possible. The unit enclosure case began life as a control box for a camera in a Dental Office. The Ammeter, which will read down to 1 mA is cheap.  The most expensive part on the unit is the Bourns 10T 10K potentiomenter which was bought with the hope that its an original. He likes to begin these projects by taking an inventory of potential parts and resources.

 

imageimage

This was a great example of a well described and well engineered project.  John has a super clean hand when it comes to building project.  His hand-built projects look so clean and well built than one would wonder why the rest of us need to have PCB built.  This is a project that I will need to build. - Community Member Judge

 

 

Also on Project14 by :

 

Project PITS by

 

Also see: Project PITS update

 

PITS is a Pickup Indicator Test System I am developing for use with injection test sets on older electronic analogue designed protection relays. This concept is not original, Omicron have such a product for use with their test set. The unit is very expensive and to my knowledge can only be used on Omicron test sets. Megger do not offer a pickup indicator detector for their test sets.This version is universal and will function with both the Omicron and Megger test sets

imageimage

"A unique idea where he has tried to simplify a complex instrumentation device to simple one. Well executed and working video presented. Lot of thinking involved in bringing something original to the project competition. Also did his own pcb design." - Community Member Judge

 

 

"A very cleaver project, addressing a unique way to extend the functionality of other instruments.  I love the magnetic puck used to read the LED." - Community Member Judge

 

micro:bit as Pass / Fail indicator in an automated test setup by

 

' first micro:bit project is to turn it into a LabVIEW test device as a pass and fail indicator. It will perform two functions:

  • A physical indicator for the test operation will display if a test passes or fails.
  • drive an output high if a test passes and another one if a test fails. This can be used to drive a buzzer or, in a full automatic setup, to push the failed device off the production line into a rework bin.

It is programmed using C / C++ and the learning experience of using the micro:bit is blogged about.

imageimage

 

"It's great to see the micro:bit coded in C rather than the usual block editor. This is clearly a genuinely useful piece of test equipment that fits nicely into a bigger setup." - Community Member Judge

 

 

"Also a device which can be very handy while doing tests and measurements. Recycling old stuff from the house; great!!; made his own pcb design and blog well written." - Community Member Judge

 

 

Also on Project14 by :

 

MinMax - Calibration Box by

 

Add a micro:bit, some switches, and display, and you have a programmable analog test instrument. When working with data acquisition systems, many times a signal doesn't behave as expected.  When diagnosing the problem, it's nice to have a reference voltage to test your inputs. I made up this quick "MinMax" test box for quickly testing analog inputs.  The MinMax is built from four simple parts, a set of banana jacks for input voltage, a BNC output jack, a variable resistor, and a box. I have one with a 1K 1 turn pot, and one using a 10 turn 100K pot for testing opamp circuits. VCC can be 3.3V, 5V, 12V, or whatever your circuit needs.  I made one up with a 1A analog meter inline also. *** Note *** there is not a current limiting resistor inline, or a fuse, so if you short the BNC, you can short your power supply.

 

To use the box:

 

1) Apply power and ground to the red(+) and black(-) banana jacks

2) Connect BNC to DAQ input, and connect in parallel to voltmeter if needed.

3) Adjust output from 0-100%

imageimage

 

"This is a simple project with more use cases. The case for the project makes it more professional and the integration of micro:bit makes it an useful

DIY project." - Community Member Judge

 

 

Also on Project14 by :

Simple resistance measurement with the micro bit and voltage divider by

 

This demonstrates a simple example of usage micro bit to measurement of resistance.  I have used for this purpose a voltage divider with reference resistance set to 1 k Ohm (1% 50ppm). Output voltage of this divider is connected to the analogue pin number 2.  The code was created in python. For this purpose I used a page python.microbit.org, which allow to generate output .hex file which I used to program my microbit. Code is really simple. If user presses button A, we are reading value of voltage from PIN 2. If this value is correct then calculation of resistance is performed and user sees on display the resistance value. If user presses button B the display will be cleared.

 

imageimage

It's good to see a nicely documented basic design (resistance measurement) that obviously inspires a follow-on project (wireless voltage measurement) that does a little more and uses more of the micro:bit's features. - Community Member Judge

 

 

 

Also on Project14 by

Honorable Mention

 

Honorable Mention

 

A Transistor Load by

 

Op amps are for wimps –this member is going for the hard stuff - a transistor design. Just kidding. Not about the transistors…   If you just want to build a load then be sensible and use op amps, particularly if you want precision from it. The reason he’s doing it with transistors is to see what he can manage in the way of a design, putting some of what he’s learned in the past to the test. It's also going to be a vehicle for looking at more transistor circuit building blocks.

 

image

image

 

 

 

 

Also on Project14 by :

 

 

SCPI on a Linux Board - Part 4b: TCP/IP SCPI and Instrument Service 100% Working by

 

This post is about building an SCPI electronics lab instrument for Linux. He's now completed both read and write functionality.

image

"Jan produced a series of blogs over the months before this project detailing the progress and including a lot of material to help others understand his project and to be able to replicate it themselves. The whole article was really interesting and informative about the SCPI command/control language. A well deserved joint first place." - Community Member Judge

 

 

 

 

Wireless voltage measurement with microbit by

 

Micro:bit has a BLE interface which we could configure to work as UART service. In this example value of voltage on PIN P2 is transmitted via Nordic UART service present on micro:bit on every one second. When Bluetooth device is connected to micro:bit the connection icon is displayed on the LED display.  Source code included!

image

 

image

 

Micro:bit VI Curve Tracer Intro by

 

  proposed using a Micro:bit to control a programmable current sink to implement an VI curve tracer for the November Project14 DIY Test Instrumentation competition.  Unfortunately, I had some personal issues that prevented me from being able to enter the competition. Coming into this he viewed the biggest challenge being around code as he's new to the micro:bit ecosystem. In particular, interfacing the I2C DAC and the SPI LCD Display.  If this were an Arduino it would be straightforward because of all the available libraries.  He decided to make the tool modular to make it more flexible.  The first module will incorporate the Micro:bit and the display shield.  The second module will include the I2C DAC and programmable current sink.  The modular approach allows me to add other functionality later.

 

imageimage

 

What's Happening Now

 

There's always stuff going on in the community and the best ideas always come from you.  Suggest your idea in the Monthly Poll!  and vote on the themes you want to do projects on. We're offering PocketBeagles for Project Proposals that use them in our Wearable Tech  and you can show your love for analog in Back to Analog!

 

 

Wearable TechBack to Analog
Project14 | Build Wearable Tech: PocketBeagles for Project ideas! Build a Device that Takes You Back to the Days of Analog!

image

image

Wearable Tech Back to Analog

 

Starting December 3rd, we'll be having our second annual Holiday Special.  The theme is Merry Boxes and LED Displays.  The goal is to Spread Mirth and Merry through Music and LED displays over the holiday season. An Oscilloscope Grand Prize to the project that brings the most joy to the world plus a Home Lab Gift to Give.  Shopping Carts and Maker Kits for 3 First Place Winners plus Shopping Cart Gift to Gives!  The competition will run till January 15th.

 

The Holiday Special: Merry Boxes and LEDs
Project14 | Holiday Special: Spread Mirth and Merry Through Music and LED Displays! Merry Boxes & LEDs
imageimage
Gift to Keep: Ben Heck's OscilloscopeGift to Give: A Home Lab Tool Kit
imageimage
Gift to Keep: A Maker Tool Kit Bundle Plus a $100 Shopping CartGift to Give: A $100 Shopping Cart

 

 

Thank you for continued support of Project14 !

 

Its been a great year and we're going to close it out with a bang!

 

In the comments below:

 

Be sure to Congratulate the Winners and Keep Being Awesome!

Parents

  • Wow, thank you everyone for the kind words and selecting my thermometer. I am honored, especially in such a project rich Project14 theme.

     

    I've learned so much during the build - from other community members, friends and colleagues. The effect of Project14 is visible here - it encourages me to try more things, ask better questions, learn more and share the information back.

    This is what the community is about. Thank you.

     

    I have been working on this for almost a year (mainly one or two days a week in the evenings, after our daughter gets to sleep) and the development still continues. I will try to prepare some more blog posts, hopefully readable also for people not interested in the thermometer itself.

     

    Thank you,

    David

Comment

  • Wow, thank you everyone for the kind words and selecting my thermometer. I am honored, especially in such a project rich Project14 theme.

     

    I've learned so much during the build - from other community members, friends and colleagues. The effect of Project14 is visible here - it encourages me to try more things, ask better questions, learn more and share the information back.

    This is what the community is about. Thank you.

     

    I have been working on this for almost a year (mainly one or two days a week in the evenings, after our daughter gets to sleep) and the development still continues. I will try to prepare some more blog posts, hopefully readable also for people not interested in the thermometer itself.

     

    Thank you,

    David

Children