Project Blog and Project Video Archive
Project Archive: Arduino | Pi / micro:bit / BB | Hardware / Software | Categories | 2020 | 2019 | 2018 | 2017
Arduino Uno
- Arduino: R-2R Experiment by jc2048
- Arduino: R-2R: Sine On You Crazy Diamond
- Arduino: R-2R: Buffer, Attenuate, and Filter
- Arduino: R-2R: "We Interrupt This Programme..."
- Arduino: R-2R: "Resistance is..."?
- Arduino: R-2R: Setting the Output Frequency
- Arduino: R-2R; "A Sweep is as Lucky, as Lucky Can Be..."
- Arduino: R-2R: Setting the Signal Amplitude
- A Simple Arduino Music Box by jc2048
- Simple Arduino Music Box: Voices
- Simple Arduino Music Box: Chords
- Simple Arduino Music Box: Envelopes
- Simple Arduino Music Box: Chimes
- 555cc
- Using the MeArm robotic arm to test battery life in the Dirty Smart Button by aspork42
- Month of Robots - MeArm test update
- LED Firework Suite - the details by 14rhb
- LED Fireworks - Festive Lights 2018
- LED Fireworks - Happy New Year
- Arduino Powered MSE-6 (Mouse Droid) by jomoenginer
- Arduino Powered MSE-6 (Mouse Droid) - Arduino Yun UI
- Arduino Powered MSE-6 (Mouse Droid) - Arduino Uno and FreeRTOS
- Arduino Powered MSE-6 (Mouse Droid) - Droid in Action
- Arduino Powered MSE-6 (Mouse Droid) – Arduino Code
- Simple Solar BOT ----Blog 1 by snidhi
- Simple Solar BOT ----Blog 2
- Simple Solar BOT ----Blog 3
- Simple Solar BOT ----Blog 4
- Simple Solar BOT Tragedy and Recovery ----Blog 5
- Simple Solar BOT ----Finale
- 3D Printer Filament Automatic Dispenser for Arduino - #1 Design and Hardware by balearicdynamics
- 3D Printer Filament Automatic Dispenser for Arduino - #2 Connection and Software
- Arduino in Test Instrumentation - Intro: SCPI Programmable Switch by jancumps
- Arduino in Test Instrumentation - Part 1: SCPI Lib
- Arduino in Test Instrumentation - Part 2: Firmware
- Arduino in Test Instrumentation - Part 3a: LabVIEW Driver Intitialisation Block
- Arduino in Test Instrumentation - Part 3b: LabVIEW Driver Switch Control Block
- Arduino in Test Instrumentation - Part 3c: LabVIEW Driver Read Status Block
- Arduino in Test Instrumentation - Outro: LabVIEW Example
- ArduTrx - a 2-meter-band ham radio transceiver with Arduino by bernhardmayer
- ArduTrx Update: Open Source Hardware and professional PCB
- ArduTrx Update: new HF modules and better documentation
- 6.25 Watt Hamradio Dummy Load
- ArduTrx with Arduino MKR
- NFC-Badge - Update your badge with your smartphone - Proof of concept by bernhardmayer
- NFC-Badge - Update your badge with your smartphone - NDEF and app
- NFC-Badge - Update your badge with your smartphone - improvements
- NFC-Badge - Update your badge with your smartphone - The right font for the display
- NFC-Badge - Update your badge with your smartphone - Design data of the HMI shield
- NFC-Badge - Update your badge with your smartphone - Using the ST X-NUCLEO-NFC02A1
- Project 'GiraSol' - Oliver Schalles by oliverschalles
- optical switch and oszi
- one channel detect by oszi
- working optos at GiraSol.Box
- doubleliquid compressed air spray gun
- silverizing attempt
- Rotation PD Nano
- Tilt Pan Griosol
- Paraboldish reflecting sunlight, lits wood
- Model of state machine
- all mached together' - sported by arduino...
- state machine fully wired, ardruino driven..
- Setup GiraSol State Machine
- State machine run - GiraSol
- Optical switch in action
- PD detect amount of light
- PD Array, mounted
- final assembly of the PD device shrink'tube to prevent light coming from aside
Arduino Duemilanove
- Process Duration Timer Blog 1 (The Timer) by jw0752
- Process Duration Timer Part 2 (Power Supply)
- Process Duration Timer Part 3 (Interfaces)
- Process Duration Timer Part (4) The Brain and Proof of Concept
- Process Duration Timer (Final Chapter) Assembly and Testing
Arduino Mega
- Plant a seed and watch it grow... (Part 1: background to the original fuzzy plant watering system) by BigG
- Plant a seed and watch it grow... (Part 2: grafting in a new branch called mDash)
- Automated Cable Test System .. part 1 by phoenixcomm
- Automated Cable Test System .. part 2
- Automated Cable Test System .. part 3
- Automated Cable Test System .. part 4
- Automated Cable Test System .. part 5
- Automated Cable Test System .. part 6
- Automated Cable Test System .. part 7
- Smarthab: Remote Sensing and Control .I by phoenixcomm
- Smarthab: Remote Sensing and Control .ii Environmental Controls
- Smarthab: Remote Sensing and Control .iii Sensors
- Smarthab: Remote Sensing and Control .iv Software Design
- Smarthab: Remote Sensing and Control .iv DHT-11 Testing (video log)
Arduino Nano
- 1DUltraBot #1 : Getting Started by dubbie
- 1DUltraBot : Part 2 : The Chassis is Moving
- 1DUltraBot #3 : Finished (and working!)
- RoboBobLet #2 : The Basic Chassis by dubbie
- RoboBobLet#3
- RoboBobLet #4 BlueTooth
- RoboBobLet #5 : A Laser RangeFinder
- RoboBobLet #6 The Scanning Laser Rangefinder
- RoboBobLet #7 : Adding a Pixy Camera
- RoboBobLet#8 : The Final Assembly
- JackBox#1 : Gathering Together Some Bits by dubbie
- JackBox#2 : Adding the Lid Opening Mechanism
- JackBox #3 : Opening and Closing the Lid
- JackBox #4 : Some Decoration and LEDs
- JackBox # 5 : Adding Some Festive Sound
- JackBox #6 : The Completed Article
- Tiny24hourMoBot #1 : Starting by dubbie
- Tiny24hourMoBot #2 : 5 Hours in
- Tiny24hourMoBot #3 : 13 hours have passed
- Tiny24hourMoBot #4 : The 24 hours is almost up
- Tiny24hourMoBot #5 : Post Script - Making it even Tinier
- TinyMoBot #6 : The Transparent Version
- TinyMoBot #7 : Using a LiPo Battery
- SuperRobot #1 : Getting Started by dubbie
- SuperRobot #2 : The Wrong Wheels
- SuperRobot # 3 : Motor Drive Interface Now Just About Working
- SuperRobot #4 : Putting it Together
- SuperRobot #5 : The End!
- DC Motor Mobile Robot : With Nano Controller by dubbie
- DC Motor Build #2 : Almost Completed Chassis and First Trials
- DC Motors Mobile Robot : Adding the Battery Container
- DCMotorsMobileRoBot #4 : 3D Printed PCB Holder
- DCMotorsMobileRoBot #5 : The PCBs are Inside the Chassis (But not all the wires are!)
- CatDogFoxBot #1 : My Initial Idea by dubbie
- CatDogFoxBot #2 : System Design and Gathering the Components
- CatDogFoxBot #3 : The Step Motor Scanner is Working
- CatDogFoxBot #4 : GridEye Sensor is Connected and Working
- CatDogFoxBot #5 : Collecting Some Temperature Data
- CatDogFoxBot #6 : Trying out an Artificial Neural Network
- CatDogFoxBot # 7 : GridEye and Artificial Neural Network Combined
- CatDogFox #8 : No Cats but Some Nice Legs
- Light Dependant Resistor Camera LDRCam) by dubbie
- LDR Camera #2 : Adding an 8x8 Dot Matrix LED Display
- LDR Camera #3 : Trying to make a Grey Scale LED matrix Display
- LDR Camera #4 : The BeagleBone AI has Landed
- LDR Camera #5 : A 64-to-4 Analogue Multiplexer
- LDR Camera #6 : Starting to Implement the Whole Camera System
- LDR Camera #7 : 98% Working
- LDR Camera #8 : Fully Working Camera
- LDR Camera #9 : Starting the BeagleBone AI
- LDR Camera #10 : The Artificial Neural Network (SimonnV5)
- Simple Solar BOT ----Blog 1
- Simple Solar BOT ----Blog 2
- Simple Solar BOT ----Blog 3
- Simple Solar BOT ----Blog 4
- Simple Solar BOT Tragedy and Recovery ----Blog 5
- Simple Solar BOT ----Finale
Arduino Leonardo
- tinyMonster AIO Robot (part-1)
- tinyMonster AIO Robot (part-2)
- tinyMonster AIO Robot (part-3)
- tinyMonster AIO Robot (part-4)
- tinyMonster AIO Robot (part-5)
- tinyMonster AIO Robot - RF remote
- ArduTrx - a 2-meter-band ham radio transceiver with Arduino
- ArduTrx Update: Open Source Hardware and professional PCB
- ArduTrx Update: new HF modules and better documentation
- 6.25 Watt Hamradio Dummy Load
Arduino Micro
Arduino Mini
- Antenna Radiation by kmikemoo
- Antenna Radiation - Phase 1
- Antenna Radiation - Phase 2
- Antenna Radiation - Phase 3
Arduino Yun
- Arduino Powered MSE-6 (Mouse Droid)
- Arduino Powered MSE-6 (Mouse Droid) - Arduino Yun UI
- Arduino Powered MSE-6 (Mouse Droid) - Arduino Uno and FreeRTOS
- Arduino Powered MSE-6 (Mouse Droid) - Droid in Action
- Arduino Powered MSE-6 (Mouse Droid) – Arduino Code
Arduino Due
Arduino 101
Arduino MKR Zero
- ARBot #1 : Testing the Concept of Augmented Reality (for Electronic Toys) by dubbie
- ARBot #2 : Connecting the Angle Sensor to the Servo Motor
- ARBot #3 : The Augmented Reality Headset
- ARBot #4 : Adding the Orientation Sensor to the VR Goggles
- ARBot #5 : The Final Working (after a fashion) System
- The specified item was not found. by sjmill01
Arduino MKR 1000
- SERA - Smart Extension Relay with Alexa - powered by MATRIX Creator and Arduino MKR1000 by dixonselvan
Arduino MKR 1010
- Boogie Bones by BigG
- TinyDVM#1 by dubbie
- TinyDVM#2
- TinyDVM#3 : Colour and Final Case
- TinyDVM#4 : Graphical Display
- TinyDVM#5 : Web Display of Voltages
- Arduino IoT Cloud controlled MKR Robot ARM: We have Movement by jomoenginer
- Arduino IoT Cloud controlled MKR Robot ARM: Das Blinken LED
- Manage Arduino MKR WIFI 1010 Battery Life in the Cloud - How Long until the Next Recharge? by jancumps
- Arduino MKR WIFI 1010 and Amazon Web Services: Safe MQTT with SSL and Certificate
- Keithley DMM6500: Measure Amp-Hours of an Arduino MKR WIFI 1010
- Manage Arduino MKR WIFI 1010 Battery Life in the Cloud - AWS, Graphs and Alerts
- Arduino MKR 10xx, ETH Shield and Amazon Web Services: Safe MQTT with SSL and Certificate
- The Windchillator - Introduction and Project Plan by bernhardmayer
- The Windchillator - Arduino IoT Cloud and visualization
- The Windchillator - Reducing the sleep current of the Arduino MKR WIFI 1010 to 800 uA
- https://www.element14.com/community/people/lui_gough/blog/2019/11/29/jingle-wi-fpy-encoding-a-tune-with-udp-packets#comm by aspork42
Arduino MKR WAN 1300
- LoRa Experimental Environmental Sensors (LoRaXes) - Introduction by ralphjy
- LoRa Experimental Environmental Sensors (LoRaXes) - Need to use a bigger case
- LoRa Experimental Environmental Sensors (LoRaXes) - GPS is Working
- LoRa Experimental Environmental Sensors (LoRaXes) - Initial RSSI Tests
- LoRa Experimental Environmental Sensors (LoRaXes) - Case Layout
- LoRa Experimental Environmental Sensors (LoRaXes) - Temperature Sensor Working
- LoRa Experimental Environmental Sensors (LoRaXes) - Case Assembly Part 1
- LoRa Experimental Environmental Sensors (LoRaXes) - Assembly Complete
- LoRa Experimental Environmental Sensors (LoRaXes) - Conclusion
Arduino MKR GSM 1400
Arduino MKR VIDOR 4000
- VidorScout - MKR Vidor 4000 Mobile Robot: Intro by jomoenginer
- VidorScout - MKR Vidor 4000 Mobile Robot: VidorBitstream compile
- VidorScout - MKR Vidor 4000 Mobile Robot: Camera QR Code Recognition
- VidorScout - MKR Vidor 4000 Mobile Robot: Assembly and Test
ESP32
- Building a poor man's quarter-wave 433MHz antenna: Introduction by gecoz
- Building a poor man’s quarter-wave 433MHz antenna: Antenna’s construction
- Building a poor man’s quarter-wave 433MHz antenna: Comparing Antennae
- Building a poor man’s quarter-wave 433MHz antenna: Testing the antenna with ESP32 LoRa
ESP8266
- Home Automation Mojo You Must Know Part 1 by sjmill01
- Home Automation Mojo You Must Know Part 2: Notification
- Home Automation Mojo You Must Know Part 3: Environmental Awareness
- Home Automation Mojo You Must Know Part 4: Actuation
- Home Automation Mojo You Must Know Part 5: The House Hub
- Connected Christmas Trees by ntewinkel
- Assembling the Trees
- Finally! Two Trees Assembled
- Two Trees by a Tree
- Connecting the Tree to the Internet
- Motion Sensor on Wemos
- Trees! one with motion sickness...
- Motion Sensor Issues, continued
- The Connected Trees are Working!
- Merry Boxes - A Project Within a Project
- Connected Christmas Trees - Finished!
- tinyMonster AIO Robot (part-1)
- tinyMonster AIO Robot (part-2)
- tinyMonster AIO Robot (part-3)
- tinyMonster AIO Robot (part-4)
- tinyMonster AIO Robot (part-5)
- tinyMonster AIO Robot - RF remote
- DIY Smartphone controlled tiny plane as weekend project for children and parents by ravi_butani
- Smart Phone controlled Plane - Aeromodelling Club MEFGI
- DIY Tiny WiFi Plane less than 15 USD Electronics Build Log
- DIY WiFi Plane - ESP12e Firmware Upload
- WiFi plane Airframe build log
- DIY WiFi Plane Android app test
- DIY WiFi Plane - Android App Installation
- DIY WiFi Plane - Crazy Flying
- WiFi controlled RC Airplane - ESP8266
- Assaulting the cloud: uploading fitness data to IoT by andyforeverest
- Assaulting the cloud: uploading fitness data to IoT (part II)
Arduino Compatible
- Kitchen Lighting System Phase 2 by genebren
- Kitchen Lighting System Phase 2 - Part 2
- Kitchen Lighting System Phase 2 - PCBs have arrived!
- Kitchen Lighting System Phase 2 - part 3 - Let there be (better) light!
- Kitchen Lighting System Phase 2 - PCBs, Schematics and new sensor module.
- Kitchen Light System Phase 2 - Drowning in EnOcean...
- Kitchen Lighting System Phase 2 - Wrap up
- Walky the Biped Robot - The prequel by genebren
- Walky the Biped Robot - Power pack
- Walky the Biped Robot - Oops, Walky has an accident!
- Walky the Biped Robot - A new hope (actually a new body and battery)
- Walky the Biped Robot - WalkyII gets some eyes.
- Walky the Biped Robot - WalkyII gets his legs
- Walky the Biped Robot - WalkyII gets a new brain
- Walky the Biped Robot - WalkyII is learning to walk again!
- Walky the Biped Robot - WalkyII is learning to walk again! (part 2)
- Walky the Biped Robot - WalkyII the final chapter.
- HomeMinder by mcb1
- Smarthab: Remote Sensing and Control .I
- Smarthab: Remote Sensing and Control .ii Environmental Controls
- Smarthab: Remote Sensing and Control .iii Sensors
- Smarthab: Remote Sensing and Control .iv Software Design
Top Comments
This is amazing. It will take me forever to get through... but it will be awesome!
Wow, what a list, and I see it is only part 1! The Element14 Community has definitely been very busy. Scanning through I see some great articles that I recall either taking part alongside, following with…
Thanks kmikemoo ! When we first started doing these competitions we use to just list all the projects and there was a lot of the great videos (big part of the program) on the page. Hoping to keep that…